EDITION 51 18 Wagner
EDITION 51 18 Wagner Fuel Tank Sealing Fuel tank sealing set is a special treatment to stop corrosion inside of fuel tanks and to protect the fuel tank from further corrosion on a longterm basis. The fuel tank sealing set consists of a rust exchanger and a single-component resin for longterm coating. Rust Exchanger: • Stops corrosion immediately, total derusting no longer necessary • Additionally converts rust into a noncorrosive metal compound • The rust exchanger is a very thin liquid and thus gets through all pores • It forms a violet-black layer, an ideal condition for the following treatment with the sealing • It saves times and money, neither intensive derusting, nor dangerous sandblasting or undercoating necessary • It may only be applied on dry, oil and grease-free surfaces • Easy application, ready for use, protect from frost • Content 2x 250 ml sufficient for tank treatments up to 40 ltrs, tank volume (or multiple applications on smaller tanks) Single-Component Sealing: • Forms a fuel and acid-resistant longterm coating • Single-component resin, thus universal application • Multiple applications possible • Economic in use • Content 500ml, sufficient for tank treatments up to 40 ltrs, tank volume (multiple applications possible on smaller tanks) 685993 Wagner tank sealing kit Loctite Blue Stick Threadlocker - Medium Strength This medium strength anaerobic threadlocker offers the same locking strength and sealing capabilities as our traditional blue threadlocking liquid. Loctite Threadlocker 242. This waxlike stick is conveniently packaged in a self-feeding stick applicator. Well-suited for difficult repairs, as in overhead applications. It can be applied to a part even if assembly is to take place at a later time, making the stick ideal for volume assembly. Removable with hand tools. 690043 19 g stick Loctite Red Stick Threadlocker - High Strength With the same convenient packaging as the medium strength Loctite Blue Stick Threadlocker, this high strength threadlocker is better suited for heavy duty applications where resistance to heavy shock, vibration and stress levels is required. Localized heating and hand tools are required to separate parts. 690054 19 g stick LoctiteThread Sealant PSTStick - High Performance The Loctite Thread Sealant PST Stick is a single component, semi-solid anaerobic pipe sealant compound. The self-feeding applicator stick facilitates application of the material where a conventional liquid or paste would be difficult to use Loctite Thread Sealant PST Stick cures rapidly to provide immediate low pressure sealing The controlled lubricity prevents galling and protects mated threaded areas from rust and corrosion and eases disassembly. Recommended for sealing metal tapered pipe threads and fittings in automotive applications. 690062 19 g stick 18.22 Chemicals, such as Oils and Lubricants may be subject to legal restrictions in your country related to labeling. Please check availability of those products through our Dealer Store or contact your Sales Representative.
LOW STRENGTH THREADLOCKERS MEDIUM STRENGTH THREADLOCKERS HIGH STRENGTH THREADLOCKERS APPAREL SEATS & TOURING FOOT CONTROLS PRemovable with hand tools PAdjustment screws PCalibration screws PMeters and gauges PUp to 1/4" diameters PRemovable with hand tools PMachine tools and presses PPumps and compressors PMounting bolts PGearboxes PUp to 3/4" diameters PRemovable with heat and hand tools PHeavy equipment PSuspension bolts PMotor and pump mounts PBearing cap bolts and studs PUp to 1" and larger diameters HAND CONTROLS LIGHTING ELECTRICAL Loctite Threadlocker 222 - Low Strength Loctite Threadlocker 222 is a low strength, purple threadlocker designed for fasteners under 1/4" (6 mm) that require occasional adjustment. Removable with hand tools for easy disassembly. Non-corrosive. 690041 10 ml tube Loctite Threadlocker 243 - Surface Insensitive LoctiteThreadlocker 243 is a general purpose, medium strength, blue threadlocker with improved oil tolerance. For fasteners between 1/4" to 3/4" (6 mm to 20 mm). Parts can be separated using hand tools. 690055 5 ml tube Loctite Threadlocker 271 - Heavy Duty Loctite Threadlocker 271 is a high strength, red threadlocker for heavy duty applications. Especially wellsuited for permanently locking studs and press fits. Adds 3,000 psi holding power on slip and press fit assemblies. Replaces set screws and snap rings. Locks against vibration loosening. Removable with heat and hand tools. For fasteners up to 1" (25 mm) in size. 690045 5 ml tube Loctite RTV Blue Silicone Gasket Maker - Sensor-Safe Replaces almost any cut gasket. Makes reliable "formed-in-place" gaskets that resist cracking, shrinking, and migrating. Coats pre-cut gaskets to increase reliability. Temperature range: -65°F to 500°F intermittent, resists auto and shop fluids. Will not foul oxygen sensors. 690040 40 ml tube EXHAUST INTAKE ENGINE GASKETS TRANNY & CLUTCH DRIVELINE WHEELS, TIRES & BRAKES 690046 10 ml bottle FRAMES Loctite Threadlocker 242 - Medium Strength Loctite Threadlocker 242 is an all-purpose, medium strength, blue threadlocker, Ideal for all nut and bolt applications 1/4" to 3/4" (6 mm to 20 mm). Eliminates the need for stocking expensive lock nuts and lock washers. Locks and seals while preventing parts from loosening due to vibration. Protects threads from corrosion. Removable with hand tools for easy disassembly. 690039 10 ml tube 690044 50 ml bottle Loctite Threadlocker 290 - Penetrating Loctite Threadlocker 290 is a low viscosity wicking grade, green, threadlocking liquid that wicks along the threads of pre-assembled fasteners to secure them in place. Since it is applied after assembly, preventive maintenance procedures are simplified. Ideal for fasteners ranging from #2 to 1/2" (2,2 mm to 12 mm) in size. Localized heating and hand tools are needed for disassembly 690063 10 ml tube Loctite Gasket Maker 518 - Anaerobic Non-corrosive anaerobic designed primarily for use on aluminum, iron and steel flanged mating surfaces. Ideal for on-the-spot and emergency repairs or when a conventional gasket is out-of-stock. Fills gaps up to 0,050" and forms a flexible, solvent-resistant seal that will not tear or decay. Parts disassemble easily even after extended service and old gasket material can be removed with a putty knife. 690047 25 ml tube FORKS & SHOCKS SHEETMETAL INSTRUMENTS & GAUGES LUBRICANTS & CHEMICALS TOOLS & EQUIPMENT FOR MORE DETAILS CHECK WWW.CUSTOM-CHROME-EUROPE.COM 18.23
