Section 12 of the Custom Chrome Europe Catalog contains aftermarket parts such as Open Belt Drives, Primary Housing & Chain Drive, Derby-,Inspection & Point Covers, Secondary Pulleys, Sprockets, Belts & Chains, Belt-& Chain Guards besides a lot more interesting stuff for Harley-Davidson and Indian Models.
642644 BDL 3" Belt Drive
642644 BDL 3" Belt Drive Kits with Billet Motor Plates Beefy, one-piece 6061-T6 polished billet motor plate locks the tranny and engine together. The fanning condition set up by the spinning pulleys and belt creates extra cooling for the filter, and the kit allows the oil lines to be hidden out of the way. All of these kits include a 3"-wide belt drive unit with polished pressure plate, double-row sealed mainshaft bearing, polished aluminum side plate and pulley covers, and a complete ‘Competitor Clutch’ with Kevlar® plates. For installation in wide frame/tire applications, choose the appropriate insert to space the front pulley out for your particular frame and driveline combination. For Softail Models from 90-06 42644 3” belt drive kit For Shovelhead Models with 4-Speed Ratchet Top Transmissions from 70-E79 with Starter Motor 42579 3” belt drive kit Note 1: Installation requires use of a 91-10 starter motor, and the use of a late 79-10 clutch arm (CC #18430) which must be modified to provide adequate clearance. Note 2: FX models require removal of the OEM oil tank bracket to allow proper starter fitment. Note 3: No provision is made for footpegs or floorboards with these kits. Replacement Belts 42515 Fits CC #612251, 42644, 642644, 697144 43036 Replacement 3” wide primary 144 tooth 8 mm belt DuPont and Kevlar® are trademarks or registered trademarks of E.I. du Pontde Nemours and Company. 12 RevTech 3" Open Belt Drive by BDL RevTech and BDL have teamed up to produce this stunning, yet affordable 3" belt drive unit. It’s the only 3" belt drive to be fitted with BDL’s patented ball bearing lock up clutch.... a must for big inch motors. The RevTech belt drive by BDL is completely made in the USA and utilizes all of BDL’s proven components. This kit includes a newly designed motor plate cut from 6061- T6 billet aluminum and then fully polished, double row sealed main shaft bearing, polished aluminum pulley covers and side plate, competitor clutch with Kevlar® friction plates and newly designed ball bearing lock up pressure plate, starter jack shaft and housing. The kit comes complete with the standard pulley offset. For installation on wide tire applications you must purchase an additional pulley offset. 642644 Polished, Fits all Softail models from 90-06 697144 Black fits all Softail models from 90-06 42515 Replacement 3” wide primary 141 tooth belt RevTech 2-3/4" Open Belt Drive by BDL We decided to go a little narrower on the later model drives, other than that the components are the same high quality and the same awesome features listed above. 697146 Black fits all Softail models from 07-17 (except FXCW/C & FXSB) 642699 Replacement 2-3/4" wide primary 142 tooth belt DuPont and Kevlar® are trademarks or registered trademarks of E.I. du Pont de Nemours and Company. BDL 3" Belt Drive Kit with 1 1/2" Offset Beefy, one-piece 6061-T6 polished billet motor plate locks the tranny and engine together. This kit includes a 3"-wide belt drive unit with polished pressure plate, double-row sealed mainshaft bearing, polished aluminum side plate and pulley covers, and a complete ‘Competitor Clutch’ with Kevlar® plates. 612224 Fits all Softail models from 90-06 DuPont and Kevlar® are trademarks or registered trademarks of E.I. du Pont de Nemours and Company. 12.4
APPAREL SEATS & TOURING FOOT CONTROLS Primo/Rivera ‘Brute IV’ Extreme This economy-priced 3"-wide, 8mm unit will get your attention. It’s electric start-compatible and features a fully-polished one-piece motor plate that’s been entirely designed for bolton component pieces. The front and rear pulleys have bolt on stainless flanges for a finished look, while the tasteful outer belt guard is 3/8"-thick billet aluminum and features a stylish bolt on derby. 667538 BRUTE IV EXTREME 07 Softail / 06-07 Dyna not for models with OEM 240mm rear tire Performance Machine Contour Belt Drive Primary 2“ The PM Contour Belt Drive Primary has several key features that make it superior to other belt drives. The motor plate and lock up clutch are designed to tolerate the power of big motors. Clutch action at the lever is eased by use of lower rate springs, while the inertia activated lock up feature keeps things from slipping when the power is poured on. Completely replaces the stock primary and utilizes a narrow belt for lightweight, better cornering clearance and does not interfere with access to forward controls. Designed to integrate seemlessly with PM Mid Mount Controls. Will fit all 91-09 HD Softails, Dynas and many customs. Does not fit FLH or FXR models. Dyna models must use forward controls or the integrated PM mid Mounts on page 35. The Primary is available in chrome and Contrast Cut finishes. The Contrast Cut finish features a blacked out primary integrated with machined Contrast Cut covers and the same quality internals. 684384 Fits 07-17 Softail, chrome (except FXCW/C & FXSB) HAND CONTROLS LIGHTING ELECTRICAL EXHAUST INTAKE ENGINE GASKETS Primo ‘Brute V’ Belt Drive Kit with Motor Plate Primo Belt Drives 14mm, 3 1/2" wide "SUPER STREET" primary belt drive is designed to handle all the horses your big stroker can make. It‘s the first 3 1/2" wide, 14mm belt drive available. PRIMO introduced the 14mm belt drive way back in 1973. Now you can get famous PRIMO quality and performance in a super wide 14mm belt drive for your Big Twin. Kits include polished outer pulley/belt cover. • Features polished motor plate and performance clutch • Has 14mm strength and a 3 1/2" wide belt • Easy installation • Electric start 667511 Fits Evolution Softail models from 90-99 BDL 3"-Wide Primary Drive Kits for Kick Start Applications Eliminate gyroscopic imbalance and belt whipping found in many 3" drives with a BDL drive kit that puts the inner hub a full inch further inboard than most other belt drives. With the rear pulley further over the main shaft virtually all instability in the primary drive is eliminated. The 8 mm pulleys are hard anodized and use a special belt that traps less air than HTD belts. The rear pulley has a double row bearing that supports a ‘Stressproof’ steel clutch hub. Also included are a clutch and polished aluminum pressure plate. Safety guards are always recommended with 3" drive systems. 42537 Kit with 47/72-tooth pulleys for Softail models with splined shaft from 90-06 42536 Kit with 47/72-tooth pulleys for Softail models with tapered shaft from late 86-89 42541 Kit with 47/76-tooth pulleys for Panhead and Shovelhead models with splined shaft from 55-E84 42542 Kit with 47/72-tooth pulleys (for less engine speed) for Shovelhead models with splined shaft from 65-early 84 TRANNY & CLUTCH DRIVELINE WHEELS, TIRES & BRAKES FRAMES FORKS & SHOCKS SHEETMETAL INSTRUMENTS & GAUGES LUBRICANTS & CHEMICALS TOOLS & EQUIPMENT for more details check www.custom-chrome-europe.com 12.5
