Section 06 Custom Chrome Europe Catalog 2026

EDITION 51 604900 6

EDITION 51 604900 6 918462 Illuminator Run, Brake and Turn Signal Module All Badlands Illuminator Modules are designed to provide you running light, brake light and turn signal functions to each rear turn signal. These modules also have a built-in Load Equalizer which is perfect when switching out factory turn signals to halogen or LED versions. Color: Black , Unit: Kit , Qty.: 1 PART# FITMENT 604900 99-03 Sportster, 97-11 Dyna, 96-10 Softail, 97-13 Touring, (except 10-13 FLHX, 10 FLHXSE, 10, 13 FLTRX, 11 FLHXSE2, 12 FLHXSE3, 12 FLTRXSE, 13 FLTRXSE2, 13 FLTRXSE2 ANV) 918462 19-20 FXDRS 114 Badlands Illuminator Pro Module This new module is a custom builders dream, and it also works perfectly on stock models. It has several of our existing modules built into one to control every feature you would want your turn signal system to do. Automatic canceling, front running lights and turn signal on single filament halogen or incandescent bulbs and LED’s, rear running lights, brake light function and turn signals on single filament halogen or incandescent bulbs as well as LED’s. A built in load equalizer runs LED’s and up to 70 watts per corner / each station. You can cancel at any time for a quick lane change and this module has emergency flasher mode that does not build up heat. • Built in automatic canceller • Built in load equalizer • Front run & turn signal for single filament bulbs, halogen bulbs & LED’s • Rear run, brake and turn signal functions like our “Illuminator” module • Emergency flasher without heating up • Cancels at any time for quick lane changes 604904 Illuminator Pro 12675 604902 Hard-Wire Super Load Equalizer This Plug-n-Play CAN/Bus Load Equalizer is needed to prevent brake light BCM trouble codes when removing center taillights on 2011-Up HD CAN/Bus models. Part#: 918463 , Fitment: 14-20 Sportster, 12-17 Dyna, 11-24 Softail, 14-24 Touring, 14-24 Trike , Unit: Each , Qty.: 1 75567 75566 Self-Cancelling Turn Signal Modules These are Original Equipment items. Excellent for stock replacement or custom projects. 75567 Replaces OEM 68540-96 75566 Replaces OEM 68537-83G 604901 Self Cancelling Modules Designed to provide a less expensive alternative to the factory flasher module. This modules are not only a built in 11-second flasher but are also a Load Equalizer which allow you to use small incandescent bulbs, halogen bulbs or LED’s without any rapid-flashing issues. They also have a 4-way flasher feature for safety or parade mode just like the factory flasher unit. Whether you have a Plug-n-Play module or the hard-wired version, they all work the same. PART# TYPE OF CONNECTION 12675 Hard-Wired DESCRIPTION Universal on 73-90 models without self canceling or Custom Bikes 604901 Plug-n-Play FLH 87-93, FX 90-93, XL 92-93 604902 Plug-n-Play All 94-99/2000 models (until Delphi TSM system with 8-Position MALE Deutsch Connector) 6.28

APPAREL Marker Light X Box Part#: 917974 , Length: 38 mm, Height: 11 mm, Width: 16 mm, Unit: Each , Qty.: 1 SEATS & TOURING FOOT CONTROLS Brake 2 Flash Control Module • Wakes up riders behind you • Provides more safety • 14 different flasher mode adjustments • Easy programming PART# HEIGHT 902045 11 38 16 Version H Electronic Box • The box is able to control the main electrical functions of your motorcycle from a central location. • Light control with switch and push button possible • Flasher control with switch and push button possible • Emergency flash function • 2 x flashes when ignition on • Comfort flasher function • Control of horn • Control of starter relay • Control LEDs in the box PART# HEIGHT 902034 25 40 12.5 HAND CONTROLS LIGHTING ELECTRICAL EXHAUST INTAKE Version D Electronic Box • This electronic box version D controls the main functions of your motorbike in combinations with switches or push buttons. PART# HEIGHT 902035 12 50 42 • Integrated flasher relay, control with buttons or switches • Integrated output for direction indicator in the cockpit • Integrated sidestand - and neutralswitch inputs if security options in the box are activated • Auto flasher off function, emergency flasher, “Position light” mode adjustable • Control of low - and high beam possible with a button or a switch • Control of starter relay • Control of the horn • Brake light control • 8 status LED´s at the outputs give a visible response of the power outputs • Recognizes automatically a connected handle bar adapter for button control. A handle bar adapter is available under “accessoires” • The new D-Box can be controlled via only 2 push buttons without the need for the user to learn complicated button combinations: • One short press on one button will activate the corresponding direction indicators. One more short press on the button switch off the direction indicators • A long press (above about 0,3 seconds) at the left button switch on the horn • A long press (above about 0,3 seconds) at the right button will switch on the starter • Two short presses at the left button will switch between high - and lowbeam • Two short presses at the right button will switch on or off the ignition • • The power outputs are short circuit protected with an implemented self reset function Touch 2 Switch 2-Channel Relay This electronic relay has 2 independent channels. Each output can drive 70 Watt. The small size allows installation in the handlebar or headlight. You can switch different loads with one push button. Two different inputs allow you to control each output with the pushbutton, whether the pushbutton is wired to ground or + 12V. The Touch 2 Switch module can also be used as a standard toggle switch relay. Just connect the thin brown input cable directly to ground and the thin blue input cable directly to + 12 volts. That‘s it. Now the module switches between output 1 and output 2 when you press the button wired to the thin purple cable. • Inputs for non-locking push-button switches in separate mode and for locking switches if the channels are linked together. • You can use very thin cables for the connection between the buttons and the module • 2 independent channels, that can be linked together in order to increase the maximum load to 120 Watt. • The small dimensions allow an implementation in the most handle bars. • The module can also work as voltage inverter. • Push-button switch (not latching) with connection to chassis or to + 12 Volt Part#: 919976 , Length: 38 mm, Height: 11 mm, Width: 16 mm, Unit: Each , Qty.: 1 ENGINE GASKETS TRANNY & CLUTCH DRIVELINE WHEELS, TIRES & BRAKES FRAMES FORKS & SHOCKS SHEETMETAL INSTRUMENTS & GAUGES LUBRICANTS & CHEMICALS TOOLS & EQUIPMENT FOR MORE DETAILS CHECK WWW.CUSTOM-CHROME-EUROPE.COM 6.29