899865 899866 899867
899865 899866 899867 899868 899869 O2 Sensors • Precision made • Meet or exceed OE specifications • Assembled in the U.S.A. • 12 mm and 18 mm versions available PART# FITMENT FITMENT NOTE DESCRIPTION OEM# 899865 10-20 Touring For The Rear Cylinder Black Connector 29“ OAL, 4 Wires 27729-10 899866 10-20 Touring For The Front Cylinder Grey Connector, 29“ OAL, 4 Wire 27809-10 899867 07-09 Touring 07-08 Touring (incl. CVO) front, 09 Touring (incl. CVO) 12.5“ OAL, 2 Wire Sensor 27719-07 rear 899868 07-11 Sportster, 07-09 Touring, 09 V-Rod, 08-10 FXDF, 07-09 FXDL, 07-11 FXDB, 07-11 FXDC, 07-08, 10-11 FXDWG, 08 FXDSE2, 09 FXDFSE, 10 FXDFSE2, 06 FXDLI, 06 FXDBI, 06 FXDCI, 06 FXDWGI, 07 FXDSE, 07 FXSTSSE, 07 FLSTSC, 07 16.25“ OAL, 2 Wire Sensor 27683-06 FLSTN, 07 FXSTD, 07 FXST, 07-08 FXSTB, 07-11 FLSTC, 07-11 FLSTF, 08 FXSTSSE2, 08 FXCWC, 09 FXSTSSE3, 09-11 FLSTSB, 10 FLSTSE, 10-11 FLSTFB, 11 FLSTSE2 899869 08-09 V-Rod 08 V-Rod front/rear, 09 V-Rod rear 22.25“ 0AL, 2 Wire Sensor 27703-08 917812 14-20 Sportster, 12-17 Dyna, 12-17 Softail, 12- 17 V-Rod 917813 12-17 Dyna, 12-17 Softail, 12-17 V-Rod Fits Sportster Front and Rear. Fits V-Rod, Dyna and Softail Rear Fits V-Rod, Dyna and Softail Front 917812 917813 12mm oygen sensor, black connector 21 OAL, 4 wire 12mm oxygen sensor, grey connector 17 OAL, 4 wire 32700006 32700005 12mm O2 Sensor Feuling 12mm Oxygen Sensor Milwaukee Eight Softail. Black connector 16 OAL, 4 wire. Fits front and rear head pipes. • Feuling 12 mm Oxygen Sensor PART# FITMENT FITMENT NOTE OEM# 917814 18-20 Softail Fits M8 Softail Front and Rear 32700083
Endurance Beehive Valve Spring Kit Quicker Revving - Smoother Motion - Light Weight Ti Retainers - Bolt in up to 650 Lift SEAT Lbs. / INSTALLED HEIGHT 198 Lbs. @ 1.685 (0.535 Lift) 194 Lbs. @ 1.703 (0.553 Lift) 190 Lbs. @ 1.724 (0.574 Lift) 187 Lbs. @ 1.754 (0.604 Lift) 185 Lbs. @ 1.780 (0.630 Lift) 160 Lbs @ 1.800 (0.650 Lift) 375 Lbs @ 1.150 OPEN HEIGHT Coil Bind @ 1.100 • FEULING BEEHIVE valve springs use a much smaller and lighter weight retainer which drastically reduces the valve weight creating a much quicker revving and smoother motion than comparable dual valve springs. • FEULING endurance springs are a direct bolt-in replacement up to 650 cam lift no machining or rocker box clearancing required. • Eliminate valve spring separation, maximize stability, reduce valvetrain noise & harmonics! • FEULING BEEHIVE valve springs must be installed at the correct OPEN HEIGHT, matching max lift to the open height spec of the valve springs PART# FITMENT 97-02 M2, 97-98 S1, 97-99 S3, 99-02 X1, 86-03 917803 Sportster, 91-04 Dyna, 84-04 Softail, 86-04 Touring 04-20 Sportster, 05-17 Dyna, 05-17 Softail, 05-17 917804 Touring Quick install Pushrod and Cover Kit 99-17 Twin Cam TC Quick Install Adjustable pushrods + tube kit, 3/8 OD tube, 0.134 wall thickness, set of 4 pushrods. Individual length Exhaust and Intake pushrods, Install WITHOUT the removal of rocker covers, requires quick install tubes. This is the strongest Quick install pushrod on the market! The strength and rigidity of this quick install pushrod is second only to heavy duty one piece pushrods. Our tube material starts out as 7/16 rod OD, it then gets turned down to 3/8 OD leaving heavy duty 7/16 - 20 threads for the base and jam nut. The jam nut slides up the pushrod, the base then loosens up into the pushrod to shorten length and allow quick install access. These chrome tubes are used conjunction with your factory inner/ upper tubes, cups, springs and washers. PART# FITMENT 917800 99-17 Dyna, 99-17 Softail, 99-17 Touring Fast Install Pushrods Econo Beehive Valve Spring Kit Dont get stung by inferior valve springs! Quicker Revving - Smoother Motion - Fit up to 585 Lift Camshafts SEAT Lbs. / INSTALLED HEIGHT 183 Lbs. @ 1.760 (0.510 Lift) 175 Lbs. @ 1.785 (0.535 Lift) 172 Lbs @ 1.803 (0.553 Lift) 165 Lbs @ 1.825 (0.574 Lift) 163 Lbs @ 1.835 (0.585 Lift) 380 Lbs @ 1.250 OPEN HEIGHT Coil Bind @ 1.180 • FEULING BEEHIVE valve springs use a much smaller and lighter weight retainer which drastically reduces the valve weight creating a much quicker revving and smoother motion than comparable dual valve springs. • FEULING ECONO springs allow up to 585 lift cams, no rocker box clearancing required. • Eliminate valve spring separation, maximize stability, reduce valvetrain noise & harmonics! • FEULING BEEHIVE valve springs must be installed at the correct OPEN HEIGHT, matching max lift to the open height spec of the valve springs PART# FITMENT 04-20 Sportster, 05-17 Dyna, 05-17 Softail, 05-17 917805 Touring 97-02 M2, 97-98 S1, 97-99 S3, 99-02 X1, 86-03 917806 Sportster, 91-04 Dyna, 84-04 Softail, 86-04 Touring PART# FITMENT FITMENT NOTE 91-98 Dyna, 85-99 Tapered 7/16 0.095 Wall Softail, 86-98 Touring, thickness, Individual length, 89-94 FXR, 90-93 FXRS_ 917795 Install WITHOUT the removal CON, 90-93 FXRSSP, 89- of rocker covers, Use factory 92 FXRS, 89-92 FXRT, 86, pushrod tubes 89 FXRSL, 87 FXRC HP+ One Piece Pushrods PART# FITMENT FITMENT NOTE 917799 99-17 Dyna, 99-17 Softail, 99-16 Touring Stock Replacement www.custom-chrome-europe.com
