Views
1 year ago

CCE SEASON SALE

  • Text
  • Wear parts
  • Spare parts
  • Headlight
  • Luggage rack
  • Sissy bar
  • Footpegs
  • Throttle by wire
  • Handlebar
  • Brake light
  • Turn signal
  • Gasket
  • Oil pump
  • Best price
  • Savings
  • Sportster s
  • V rod
  • Wwwcustomchromeeuropecom
  • Dyna
  • Sportster
  • Softail
Great Savings for a good start into the season. From Helmets to Oil Pumps ... check it out!

SEASON

SEASON SALE 2022 - 1 VALID TO JUNE 3 RD 2022 SEASON SALE 2022 - 1 VALID TO JUNE 3 RD 2022 12% 12% 12% High Output Billet Oil Pump Ultima® now has its own line of oil pumps including the Ultima® standard Volume (s.V.) Oil Pump, and the Ultima® High Output (H.O.) Oil Pump. Ultima®’s main focus on the development of the new oil pumps was consistency. Ultima® pumps are checked on a Coordinate Measuring Machine, and flow tested on a test stand to insure the oil pumps are consistent from one pump to the next, and the motor is getting adequate oil. Ultima®’s s.V. pump performs with similar characteristics of the stock pump for volume and pressure. The H.O. pump has a much greater potential for pressures and volume. Unlike stock oil pumps which won’t start feeding the bottom end oil until 2000+ RPM, tests show the H.O. Pump will feed the bottom end at idle speeds, and keep a consistent flow throughout the R.P.M range to keep from floating bottom end bearings. Bottom line, you are getting a precise pump that you can be confident in. Check fitting for Baggers due to master cylinder. • High Output (H.O.) Oil Pump • Flow tested on a test stand to insure the oil pumps are consistent • Performs with similar characteristics of the stock pump for volume and pressure • The H.O. pump has a much greater potential for pressure and volume • Start feeding the bottom end at idle speeds, and keep a consistent flow throughout the RPM range 919839 Fitment: 85-91 FX Model, 91 Dyna, 84-91 Softail, 86-91 Touring, Color: Black, Finish: Wrinkled, OEM #: 26190- 73, Unit: Each, Qty.: 1.0 Cylinder Studs Machined from U.S. milled fine grain, heat treated aircraft quality steel.180,000PSI yield strength. Threads rolled after heat treat for maximum strength and fatigue life Centerless ground OD to insure concentricity. Case end threaded for interference fit to insure good thread contact even as aluminum case expands at high temps. Black Oxide finish to resist corrosion and give an excellent appearance. Sold as a Set of 8. 55136 Fitment: 86-20 Sportster, Color: Black, OEM #: 16832- 86C, Material: Steel, Unit: Pack, Qty.: 8.0 15% Compensating Sprocket Complete Kit Replace your worn out Original Equipment unit with one of these complete assemblies. Each of these assemblies includes the shaft extension, cover with springs, sliding cam, engine nut and sprocket. 14235 Fitment: 91-93 Softail, Material: Steel, Teeth: 24.0teeth, Unit: Kit, Qty.: 1.0 3“ Open Belt Drive RevTech and BDL have teamed up to produce this stunning, yet affordable 3“ belt drive unit. It’s the only 3“ belt drive to be fitted with BDL’s patented ball bearing lock up clutch.... a must for big inch motors. The RevTech belt drive by BDL is completely made in the USA and utilizes all of BDL’s proven components. This kit includes a newly designed motor plate cut from 6061- T6 billet aluminum and then fully polished, double row sealed main shaft bearing, polished aluminum pulley covers and side plate, competitor clutch with carbon fiber friction plates and newly designed ball bearing lock up pressure plate, starter jack shaft and housing. The kit comes complete with the standard pulley offset. For installation on wide tire applications you must purchase an additional pulley offset. 642644 Fitment: 90-06 Softail, Color: Aluminium, Finish: Polished, Material: Aluminium, Belt Pulley Width: 3“, Unit: Kit, Qty.: 1.0 15% Wide Outline Springer Fork • Fork stem with offset • Reinforced top and bottom trees reduce flex and improve handling • TIG welded alloy steel construction for strength and durability • Kit includes main springs, fork legs, neck, top nut, crown nut, rocker assemblies with brass bushings and top clamp Fitment: 84-22 Softail, 91-17 Dyna, 80-20 Sportster, Material: Steel, Unit: Each, Qty.: 1.0 PART# COLOR FINISH DESCRIPTION 921466 Black Powder Coated 24“ Lower Stem Bearing Cup to Axle Center 921464 Black Powder Coated 22“ Lower Stem Bearing Cup to Axle Center 921462 Black Powder Coated 20“ Lower Stem Bearing Cup to Axle Center 921460 Black Powder Coated 18“ Lower Stem Bearing Cup to Axle Center 921463 Chrome 20“ Lower Stem Bearing Cup to Axle Center 921467 Chrome 24“ Lower Stem Bearing Cup to Axle Center 921469 Chrome 26“ Lower Stem Bearing Cup to Axle Center 921465 Chrome 22“ Lower Stem Bearing Cup to Axle Center 12% 15% 12% 26% American Made Tappet Assemblies Top quality American made tappet assemblies available for Sportster, Panhead and Shovelhead models. • Sold each • Adjusters and lock nuts sold separately 010581 Fitment: 53-65 Panhead, 66-84 FL Shovel, 71-84 FX Shovel, Fitment Note: Except L84 Models., : Standard Size, Operation Type: Hydraulic, Unit: Each, Qty.: 1.0 1 5/8“ 8mm Bolt-In Belt Drive Kit Engineered to handle the most brutal torque and horsepower demands. Requires no primary case modifications to install. Features a cylindrical-shaped, replaceable clutch dog capable of withstanding 1200 foot pounds of torque. BDL’s steel hub design moves the clutch basket inward, eliminating unnecessary weight hanging from the mainshaft. Barnett carbon fiber clutch provides 70% greater surface area than stock for maximum hook-up. Complete kit includes front and rear pulleys, clutch, and a sealed clutch hub bearing. 42518 Fitment: 87-89 Softail, : 45 Tooth Front/68 Tooth Rear, 138 Tooth 1 5/8“ Belt, Belt Pulley Width: 1 5/8“, Unit: Each, Qty.: 1.0 1 1/2“ 8 mm Bolt-In Belt Drive Kits for 4-Speed Models The 8mm belt pitch has been used for years on primary drives and the 1-1/2“-wide kit is considered by many to provide the best all-around combination for dependable operation. Kits include front pulley, rear clutch and hub/pulley . Designed for use with existing clutch hub and clutch. 42524 Fitment: 65 Panhead, 66-78 FL Shovel, 71-78 FX Shovel, Fitment Note: For Electric Start Models only., : 41 Tooth Front/61 Tooth Rear, 132 Tooth 1 1/2“ Belt, Belt Pulley Width: 1 1/2“, Unit: Kit, Qty.: 1.0 Wide Inline Springer Fork • Fork stem inline • Reinforced top and bottom trees reduce flex and improve handling • TIG welded alloy steel construction for strength and durability • Kit includes main springs, fork legs, neck, top nut, crown nut, rocker assemblies with brass bushings and top clamp 08635 Fitment: 49-65 Panhead, 66-79 FL Shovel, 80-84 FLH, 80-84 FLHC, 80-84 FLHS, 82-84 FLHP, 83-84 FLHT, 83-84 FLHTC, 83-84 FLHTP, 71-84 FX Shovel, 84-99 Softail, Field of Application: For use with 1“ neck bearing only., Fitment Note: Requires 1/2“-20 riser bolts and 3/4“diameter axle., Color: Black, : 20“, Certification: CCE TÜV-Approved, Position: Front, Unit: Each, Qty.: 1.0 SALE.22 for more details check www.custom-chrome-europe.com for more details check www.custom-chrome-europe.com SALE.23

CCE Online Publication

Wear parts Spare parts Headlight Luggage rack Sissy bar Footpegs Throttle by wire Handlebar Brake light Turn signal Gasket Oil pump Best price Savings Sportster s V rod Wwwcustomchromeeuropecom Dyna Sportster Softail