Views
1 year ago

9 ENGINE

  • Text
  • Harleyteile
  • Valve
  • Valve
  • Camshaft
  • Pump
  • Panhead
  • Rockerbox
  • Piston
  • Cylinder
  • Stroker
  • Pushrods
  • Valvetrain
  • Evolution
  • Cam
  • Pan
  • Shovel
  • Motor
  • Motor
  • Evomotor
  • Engines
Complete engines, engine parts, pistons, cylinders, oil pumps, cams, pinion gear, valves, engine covers, rocker boxes

9 Motor to EVO Frame

9 Motor to EVO Frame Adapter Plate for Twin Cam Models 06-17 Adapts all Softail and Rigid EVO frames to Twin Cam 96” ‘A’ motors 06-17. The motor adapter plate includes all hardware, oil line fittings and o-rings. Needs the transmission offset plate listed below! 656077 Motor to frame adapter plate TC96/103 engine fits Evo style frames 656079 Offset transmission plate for any 5 or 6 speed Softail transmission when CCI# 656077 T/C adaptor plate is used. Jims Replacement Cam Cover Dowel Pins Replacement pin for JIMS Cam Cover No.’s 25258- 80A & 25254-93A. Also use on stock H-D case (repl.OEM#.358). Use 2 per case. Sold in a pack of 10. Use on Big Twin single cam only from 70-99. 696570 Cam cover dowel pins for models from 70-99 Generator Oil Filter Adapter This adaptor allows you to install an oil filter in place of the generator on 36-69 motors as well as our Pandemonium or S&S Shovelhead engines with generator/alternator bottoms. Use OEM 63796-77A or equivalent aftermarket oil filter. Chrome finish. 632025 Generator oil filter adapter JIMS ‘Powerglide’ Hydraulic Tappets Designed for high-performance. Won’t collapse at high RPM. The performance of a solid lifter combined with full compensation for heat expansion. These tappets are coated with a special di cro nite DL-5 coating, and hand-fitted to achieve a running fit of .0002" to eliminate hydraulic tappet collapse. For Late Evolution Sportster Motors Hydraulic tappets compatible with the Original Equipment tappet blocks on 5-speed Evolution Sportster 91-99 and 96-99 Buell models. 20739 Standard .9035" O.D. (sold each) For Twin Cam Models from 99-17, and Sportster 00-19 and 00-10 Buell (except 1125) Models 22351 Standard .8420" O.D. (sold each) Inner Primary Adaptor Ring for Twin Cam Engines 06-17 Adapts 70-05 inner primary covers to 06-17 T/C- 96” ‘A’ motors. 656078 Motor to inner primary adapter ring TC96/103 engine fits Evo style primaries JIMS Camshaft Seal Top-quality seal for all Big Twin models from 70-99 (except 99 Twin Cam). Sold each. 20765 Replaces OEM 83162-51 25 Tooth Motor Sprocket for Twin Cam Engines 06-17 06-17 Twin Cam 96 ‘A’ motors use a 24 Spline motor sprocket shaft and require this 25 tooth sprocket. For use with 98-up clutch hubs assemblies. 656080 25 tooth motor sprocket Twin Cam 96/103 engine fits Evo style primary S&S High Performance Tappets for Twin Cam Engines These tappets are standard equipment in the new S&S 124" engines, and are a good choice for any stock or high-performance application. Whether you have a stock 88 incher or the most outrageous big inch engine with a radical cam and spring combination, these S&S tappets are built to take it. Includes the HL2T Limited Travel Kit for improved cold starts and high rpm valve timing accuracy. Fits all Twin Cam engines from 99-17. 601729 Tappets (set of 4) Note: Requires the use of adjustable pushrods. Jims POWERGLIDE Steady Roll Tappets Jims replaced the needle rollers with a special bronze alloy bushing and attached the new roller assembly to their proven “Powerglide” tappets. An added bonus to increased reliability and longer life. Much quieter operation due to the tighter tolerances this design allows. 642291 For 84- Evo, 86-90 Sportster and 87-90 Buell models standard size 642292 For 84- Evo, 86-90 Sportster and 87-90 Buell models (+.002) 642293 For 84- Evo, 86-90 Sportster and 87-90 Buell models (+.005) 642294 For 99- Twin Cam and 00- Sportster & Buell models standard size 642295 For 99- Twin Cam and 00- Sportster & Buell models (+.002) 642296 For 99- Twin Cam and 00- Sportster & Buell models (+.005) 9.62

ENGINE APPAREL SEATS & TOURING FOOT CONTROLS HAND CONTROLS Standard Big Axle LIGHTING JIMS Hydrosolid Tappets Safely add more horsepower to your higher RPM levels with the simple installation of Hydro solids. Use with any cam be it solid or hydraulic, and receive 3 to 6 more usable horsepower from about 5600 RPM, to the safest RPM level possible for your valve train. Hydrosolids have a built in anti pump-up device, so the tappets will not pump-up, preventing valve contact. Sold each. Adjustable pushrods are necessary. For Evolution Big Twin Models from 84-99, and Evolution Sportster and Buell Models from 86-90 20845 Standard .8425" O.D. (repl. OEM 18523-86) For Twin Cam Models from 99-17 and Sportster 00-19 and 00-10 Buell (except 1125) Models 22306 Standard .8425" O.D. (repl. OEM 18538-99) For Sportster Models from 91-99 22307 Standard .9035" O.D. (repl. OEM 18529-89) JIMS Powerglide Tappets All-new design improves tappet reliability by eliminating the inner bearing race. Simplifying the design of the tappet increases the wall thickness of the roller by 27%, and provides a 36% increase in the size of the tappet axle. The result is a tappet with twice the strength and stability of the stock design. Sold each. ‘Big Axle’ Tappets for Evolution Big Twin Models from 84-99 and Evolution Sportster and Buell Models from 86-90 Hydraulic tappets compatible with the Original Equipment tappet blocks. 20732 Standard (repl. OEM 18523-86) 20733 .005" oversize Solid tappets compatible with the OEM tappet blocks. Must use adjustable pushrods. 22352 Standard Standard Powerglide Tappets for Early Sportster Models Solid tappets compatible with the Original Equipment tappet blocks on Sportster models from 57-85. 20581 Standard 20582 .005" oversize HP+ Lifters for EVOs by Fueling Performance hydraulic roller lifters for optimized oil flow to top end - valves, springs, rockers, shafts & valve guides. Cooler oil and reduced wear which extends life of top end valve gear. CNC machined and precision ground for drop in replacement. Dyno developed and track tested. For use with a high volume oil pump. Set of four. 622167 Fits all Evo Big Twins L84-99 (except 99 Twin Cam) 20256 ELECTRICAL EXHAUST INTAKE ENGINE GASKETS TRANNY & CLUTCH DRIVELINE Standard Powerglide Tappets Big Twins from 53-E84 (Body only) Hydraulic tappets compatible with the Original Equipment tappet blocks on Panheads and Shovelheads from 53-84. 20584 Standard (repl. OEM 18522-53) 20583 .005" oversize 20257 WHEELS, TIRES & BRAKES FRAMES RevTech Hydraulic Lifter for Twin Cams and Sportsters Replacement hydraulic lifters for all Twin Cams and Sportsters. CNC machined and precision ground from high strength steel alloy. Sold each. 642020 Hydraulic lifter set for Twin Cams 99-17 and Sportsters 00-19 (repl. OEM 18538- 99) Note: these are bodies only. You can use either CCI# 56140 hydraulic unit or CCI# 36108 solid lifter conversion kit with these bodies. Solid adjustable tappets compatible with the Original Equipment tappet blocks on Panheads and Shovelheads from 48-E84. 20580 Standard (repl. OEM 18492-48) Hydraulic tappets compatible with Original Equipment tappet blocks and cases with oil passages to tappet blocks on Panhead and Shovelhead motors from 53-E84. Must be used in conjunction with JIMS Pro-Lite Pushrods ONLY (CC #20928). 20586 Standard 20585 .005" oversize S&S Hydraulic Roller Tappets Increase the performance of your valvetrain with this new tappet design. Made from highstrength steel alloy that is precision-machined on CNC equipment and heat-treated for strength and wear-resistance. Components are computer-matched and measured to tolerances of microns for more precise oil metering and improved oil control, permitting the valvetrain to reliably perform up to 500 RPM higher than stock tappets. Sold each. 20257 Fits Evolution Sportster and Buell models from 91-99 FORKS & SHOCKS SHEETMETAL INSTRUMENTS & GAUGES Note: Roller-to-tappet block clearance must be checked on Panhead and Shovelhead motors with high-lift cams, and must be used with OEM 17904-66 or equivalent pushrods. LUBRICANTS & CHEMICALS TOOLS & EQUIPMENT for more details check www.custom-chrome-europe.com 9.63

CCE Online Publication

1 APPAREL
3 FOOT CONTROLS
4 HAND CONTROLS
5 LIGHTING
6 ELECTRICAL
7 EXHAUST
9 ENGINE
10 GASKETS
11 TRANNY & CLUTCH
12 DRIVELINE
13 WHEELS, TIRES & BRAKES
14 FRAMES
15 FORKS & SHOCKS
16 SHEETMETAL
17 INSTRUMENTS & GAUGES
19 TOOLS & EQUIPMENT
01-2019 Rhine Time
02-2019 10 Years Anniversary BOAR Bikes
01-2018 BOAR Bike Fusion
03-2018 BOAR Bike CCEagle
05-2018 BOAR Bike CrossBob
04-2018 BOAR Bike H9 Sportster
2014 BOAR Video Sexy Thing
2015 BOAR Video THIS_IS
2017 BOAR Video AT NIGHT
2016 BOAR Ride Video Ride Unrivalled
02-2018 MBE Verona Bikeshow
03-2018 European Bike Week Faak
2016 CC-Riders
CCE SPECIAL FEATURE Cafe+Dirt Track

Hot New Products

KURYAKYN DILLINGER FLYER
CCE-2020-Heinz-Bikes
CULT-WERK SPECIAL
JAMMER GRIPS
Custom Chrome Europe OEM-Style Replacement Wheels
TORC HELMETS & GLOVES
Harleyteile Intake Valve Exhaust Valve Camshaft Oil Pump Panhead Rockerbox Harley Piston Harley Cylinder Stroker Pushrods Valvetrain Evolution Twin Cam Pan Shovel Harley Motor Twin Cam Motor Evomotor Engines