9 Retaining Ring Kits for Big Twin and Sportster Models These kits of commonly used retaining rings are packaged in KAL-REZ polycarbonate trays with snap-lock lids that prevent the contents from spilling out, even if the trays are turned upside down. The inside lid of each kit has a handy reference chart showing location, Custom Chrome and OEM part numbers for easy reordering when needed. All of the individual rings are listed to the right, and are available in replacement shop supply 10-packs. Replacement Snap Rings listed below in OEM number order (packs of 10) 49112 Fits miscellaneous shift, clutch and control levers on models from 72-88 (repl. OEM 11036) 49119 Piston pin. Fits Big Twins from late 77-E83 and Sportster models from late 77-E85 (spirallocks)(repl. OEM 22588-78) 49120 Piston pin. Fits 86-20 Sportster and L83-99 Big Twin, except 99 Twin Cam (repl. OEM 22589-83) 10 pcs 49124 Idler gear stud. Fits OHV Big Twins from 32-57 (repl. OEM 25810-15) 54250 Oil pump drive shaft. Fits OHV Big Twins (except Twin Cam 88 models) from 36-99 (repl. OEM 26348-36) 56355 Transmission mainshaft ball bearing. For 52-E84 Sportster and K models (repl. OEM 35112-52) 56337 Transmission roller bearing. For 52-E84 Sportster and K models (repl. OEM 35113-52) 56301 Mainshaft 2nd/3rd gear. For 37-86 Big Twins (repl. OEM 35337-36) 56320 Retaining ring, mainshaft third gear, 56-90 Sportster and K models (repl. OEM 35337-56) Pack of 10. 56302 Countershaft bearing. For 37-E76 Big Twins (repl. OEM 35920-36) 12201 Right main bearing. for 87-20 Sportster, 87-99 EVO Big Twin and 96-02 Buell (repl. OEM 11177A) 12202 Right main bearing. for 87-20 Sportster, 87-99 EVO Big Twin and 96-02 Buell (repl. OEM 11177A) 924519 924518 Piston Pin Bushing Unit: Pair , Qty.: 1 PART# FITMENT DESCRIPTION OEM # 924518 48-65 Panhead, 66-84 FL Shovel, 71-84 FX Shovel, 85-94 FX Model, 91-99 Dyna, 84- 99 Softail, 86-99 Touring 924519 99-06 Dyna, 00- 06 Softail, 99-06 Touring +.010“ 24335-36 Standard 24316-99 Motor Factory Wrist Pin Bushings Premium grade bushings are machined from high phosphor bearing bronze that’s up to two times as stronger than cast bushings. They have excellent hardness, strength and will help minimize wear and provide a much longer service life than plated steel backed bushings. American-made. Sold in pairs. 021011 Fits Sportster models from 52-20. Replaces OEM 24331- 36 021013 Fits Big Twin models from 36-99(except Twin Cam). Replaces OEM 24334-36 9.26
APPAREL Jims Piston Pin Bushing Twin Cam 88 Bushings are sold in packs of 2. For removal and installation, use JIMS tool No.1051. To ream to correct size, use JIMS No.1726-3 wrist pin reamer. Bushing O.D. is 1.017"+-.0005, I.D. is .927” (repl. OEM# 24316-99). Use on all Twin Cam 88 models. 696587 Piston pin bushing Wrist Pin Bushing by Kibblewhite Made from solid U.S. Mill certified SAE 660 bearing bronze bar stock. This material is resistant to impact, wear, and corrosion, and has superb anti-friction properties. It also has excellent machinability, meaning a high quality surface finish can be achieved. This combination of mechanical properties creates a tough durable bushing that will meet or exceed the fitment and service life of all other replacement style bushings available. Wrist pin bushings come in standard size or 0.002” oversized. Designed for Panhead 48-65, Shovelhead 74” 66-77, Shovelhead 80” 78-83, and Evolution 84-99. Sold in pairs. 622236 Standard 0.897” in. 622237 Oversize 0.899” in. Wrist Pin Bushings For Twin Cams “Engine Builder” Series Designed and manufactured by Kibblewhite to original OEM dimensions with quality and precision. Made from SAE660 bearing bronze. The bushings have excellent anti friction qualities, as well as good hardness, and resistance to wear and deformation under high loads. These bushings are made to exact tolerances and will meet or exceed fitment and wear ability of all other replacement bushings available. Fits Twin Cam models 05-Up. Sold in pairs. 622309 Standard 1.0190” in Note: These wrist pin bushings do not include oil holes. They must be drilled after installation. Engine Roller Bearings American-made rollers. Sold in resealable bags of 100. Short Rod Rollers Fits 1952 K-models and OHV Big Twins 51-72 (36 used) CCI # JIMS SIZE OEM # 49002 +.0004 9103A Fits Sportster and KH models 54-E86 and Big Twins from 73-86 (34 used) CCI # SIZE OEM # 49029 +.0008 9445A 49031 +.002 9418 49032 +.003 n/a 49033 –.0002 9450A Long Rod Rollers Fits Big Twins from 73-86 (17 used) CCI # JIMS SIZE OEM # 696580 +.0002 9180 696581 +.0004 9181 49019 696582 +.0006 9182 696583 +.0008 9183 696584 +.001 9184 696585 +.002 n/a Crankcase Rollers for Big Twins Fits the left case of OHV Big Twins 30-57 (24 used), and the right case 58-86 (28 used). Also fit all early wheels. CCI # JIMS SIZE OEM # 49052 +.0008 9224A Right Side Crankcase Rollers for Sportster and Big Twin Models Fits 57-76 Sportster models and 55-57 OHV Big Twins (13 used) CCI # JIMS SIZE OEM # 49043 +.0002 9422 49047 696605 +.001 9426 SEATS & TOURING FOOT CONTROLS HAND CONTROLS LIGHTING ELECTRICAL EXHAUST INTAKE ENGINE GASKETS TRANNY & CLUTCH DRIVELINE WHEELS, TIRES & BRAKES FRAMES 919867 919869 FORKS & SHOCKS Big Twin Piston Pin Clip Unit: Each , Qty.: 1 PART# FITMENT DESIGN OEM # 919868 37-52 Flathead, 37-47 Knucklehead, 48-65 Panhead, 71- 72 FX Shovel, 66-72 FL Shovel 919867 73-77 FX Shovel, 73-77 FL Shovel, except L77 models Circlip 22581-32 Spiral Type 919869 78-84 FX Shovel, 78-84 FL Shovel Retaining Ring 22582-52 22588-78 Engine Piston Pin Retaining Ring Part#: 924423 , Fitment: 99-17 Dyna, 00-17 Softail, 99-16 Touring , OEM #: 22097-99 , Unit: Pack , Qty.: 10 SHEETMETAL INSTRUMENTS & GAUGES LUBRICANTS & CHEMICALS TOOLS & EQUIPMENT for more details check www.custom-chrome-europe.com 9.27
