Views
2 years ago

6 ELECTRICAL

  • Text
  • Bus
  • Thundermax
  • Rotor
  • Stator
  • Regulators
  • Coils
  • Connectors
  • Battery
  • Module
  • System
  • Fuses
  • Relay
  • Module
  • Equalizer
  • Battery
  • Battery
  • Kabelbaum
  • Plugs
  • Batterie
Motorcycle wiring connectors, wiring harness, tuning modules, O2 sensors, CAN BUS modules, wiring modules, control units, load equalizers, relays, fuses, ignition systems, ignition modules, spark plugs, batteries, coils, regulators, stator, rotor

895139 Lithium 6 Junior

895139 Lithium 6 Junior 800, Selectable Lead Acid/ Lithium • Output: 12 V @ 800 mA • Input voltage: 220 to 240 Vac, 50/60 Hz • Charger weight: 467 grams • Size: 8,3 cm x 5 cm x 3,5 cm • ISMTM Microcontroller constantly updates charge sequence for smooth transitions between charging steps • Spark proof • Short circuit protected • Reverse hook-up protection • Safety timer • Selectable for AGM, flooded and GEL or Lithium (LiFeP04) batteries 895139 800 mamp Power Battery Tender Portable Power Pack by Battery Tender • Lithium Powered • LED light for using at night • LED charge indicator • 400 cranking Amps • 1 Year warranty • Jump start your car or charge your portable devices. • Reverse Polarity Protection • Size: Approx. 3.5 in x 6.75 in 890455 Jump Starter with USB Charger, 12 V 890547 Battery Tender Waterproof Chargers • Spark-proof, even when the leads are touched together • Reverse polarity protected – will not damage charger if hooked up incorrectly • Easy to install and use • Safe in all weather conditions • Will safely charge and maintain any size 12-volt battery though 200 amp-hour capacity • Safe and easy to use on all lead acid batteries • Solid-state two color LED indicates start of charge Battery Tender Waterproof Chargers 686744 For Europe Replacement Parts 2851015 Alligator clip-style quick connect harness (sold each) 2851016 Black fused grommet-style quick connect harness (sold each) Lithium Battery Tender Charger Accessories The Battery Tender Plus High Efficiency is a 1.25 amp battery charger designed to fully charge a battery and maintain it at proper storage voltage without the damaging effects caused by trickle chargers. Included is a quick connect ring terminal harness for hard to reach areas and alligator clips for an alternate connection. • High frequency design • Temperature compensation sensor adjusts voltage for extreme heat or cold • Automatically switches from full to float charge • Features water resistant case • Multiple plugs available for most countries • 12 volt - 1.25 A output with input voltage range from 100-240 V • Weighs only 6 oz. Battery Tender International Chargers 686832 For Europe Lithium Battery Charger WP800 by Battery Tender • Input: 120 VAC @ 60 Hz • Designed to charge any 12 volt Lithium (LiFePO4) Battery • Spark Proof • Short Circuit Protected • Reverse Polarity Protected • Auto recovery mode for batteries with very low voltage • Weatherproof • Weighs only 1 Pound • 3 Year Warranty 890547 Lithium battery charger WP800 Battery Tender Accessory Bag This bag will accommodate the Battery Tender Junior or the Battery Tender Plus including all connectors and accessories. 2851017 Accessory bag 5A Power Tender Series High Efficiency by Battery Tender The Battery Power Tender Plus High Efficiency is a 5 amp battery charger that will fully charge and maintain a battery at its proper storage voltage without the damaging effects caused by trickle chargers. • Short Circuit Protected • Reverse Polarity Protected • Safety timer: 72 hours • 5-Year Warranty • Dimensions: 3.99 W x 8.26 L x 2.34 H 890449 Battery Charger, Power Battery Tender® Plus HI 12 V 5 A 6.92

ELECTRICAL APPAREL SEATS & TOURING FOOT CONTROLS Stereo Accent Made from lightweight ABS. No tools or disassembly required for installation. Fits: ‘96-’13 Electra Glides, ‘06-’13 Street Glides & ‘09-’13 Trike 773765 Chrome (ea) HAND CONTROLS Battery Tender 12-Volt 4-Bank International Chargers The 4-Bank International battery tender charging station works anywhere in the world! Designed to fully charge a battery and maintain it at proper storage voltage without the damaging effects caused by trickle chargers. • Features 4 independent charging systems and 12 volts at 1.25 amps per station • Weighs less than 3 lbs.! • Operates anywhere in the world (100-240 VAC 50/60 Hz.) • Microprocessor controlled constant current charging • Reverse polarity protected • Complies to all International safety standards • Perfect for all AGM, sealed maintenance free and flooded batteries • Optional 25 ft. extension leads available • Features 2 year warranty! Battery Tender 4-Bank Chargers 686834 For Europe GEN III Sound of Chrome Speakers by Kuryakyn Perfectly designed 3" main speakers with additional tweeters for full bodied sound. The weatherproof bullet housing has powerful built-in true 50 watt amplifier & includes a volume & on/off control switch. Convenient swivel adjustment gives you the freedom to position speakers in any direction you choose. With a full plug & play wiring harness, noise purifier & standard 3.5 mm jack, simply connect your iPod, MP3 player, satellite radio, personal CD player, etc, & ride on. 605315 Speakers for 1 1/4” bars 605316 Speakers for 1” bars Switch Panel Accent by Kuryakyn This trim places an attractive chrome frame around the ignition & the adjacent control switches. The smooth chrome surface is much easier to keep clean than the stock matte finish. Simple peel-&-stick installation requires no tools or disassembly. 605184 Switch accent panel, fits 96-13 Touring, 09-13 Trike LIGHTING ELECTRICAL EXHAUST INTAKE ENGINE GASKETS TRANNY & CLUTCH DRIVELINE WHEELS, TIRES & BRAKES FRAMES Battery Tester Motobatt 888225 MOTOBATT battery tester MBT Steel Mesh Speaker Grills with Tweeters Kit by Hawg Wired Increase the sound quality of your factory Road Glide speakers with these cool units from Hawg Wired. Features a steel mesh grill with integrated tweeter and built in crossover. 689607 Hawg Wired steel mesh speaker grills with tweeter for all 98-13 FLTR Road Glide models Harmon/Kardon Dummy Module by Hawg Wired If you’re installing a Hawg Wired amplifier kit in a 06-08 Batwing fairing (Harman/Kardon / Harley-Davidson radio) with only one CB or XM module, you will need one of these. This bracket acts as a dummy module to give the amplifier a level surface to mount to on top of the factory radio. If you don’t have any add on modules, or if you have both a CB and XM module, you will not need this to install the amplifier. 689601 Dummy module FORKS & SHOCKS SHEETMETAL INSTRUMENTS & GAUGES LUBRICANTS & CHEMICALS TOOLS & EQUIPMENT for more details check www.custom-chrome-europe.com 6.93

Can Bus Thundermax Rotor Stator Regulators Coils Wiring Connectors Lithium Battery Tuning Module Ignition System Harley Fuses Flasher Relay Control Module Load Equalizer Touring Battery Softail Battery Harley Kabelbaum Spark Plugs Harley Batterie