Views
2 years ago

6 ELECTRICAL

  • Text
  • Bus
  • Thundermax
  • Rotor
  • Stator
  • Regulators
  • Coils
  • Connectors
  • Battery
  • Module
  • System
  • Fuses
  • Relay
  • Module
  • Equalizer
  • Battery
  • Battery
  • Kabelbaum
  • Plugs
  • Batterie
Motorcycle wiring connectors, wiring harness, tuning modules, O2 sensors, CAN BUS modules, wiring modules, control units, load equalizers, relays, fuses, ignition systems, ignition modules, spark plugs, batteries, coils, regulators, stator, rotor

893349 893338 Headlight

893349 893338 Headlight & Passing Lamp Adaptor Harness 893349 For 90-04 models using 4” auxiliary lamps (each) 6 Wannabe-Choppers CANIOX Module for CAN- BUS models Since 2011 several HD models are equipped with a CAN-BUS a.k.a. “HD-LAN”. This internal communication system restrains certain replacement of components like the handlebar control switches. CANIOX has been developed to overcome this problem and to enable you to use custom handlebar controls e. g. from PM, Rebuffini, Joker Machine, RST or Ness (to name just a few of them). Up to now customizers had to disassemble the OEM CAN-BUS hand control units, remove the original electronic circuit boards and connect them to replacement switches. This has been a time consuming effort which destroyed the OEM hand control units, worth about 800 Euro (Set). It has been a risky job too because a single short-circuit due to a bad soldering of the wires could easily block the whole HD-LAN communication. CANIOX is a self-contained 53 mm x 73 mm x 16 mm small unit with wires of sufficient length to conventionally connect them to the handlebar wire harness. Colour coded wires and an easy but sufficient installation guide are facilitating the mounting of CANIOX. After installation CANIOX receives the switch signals of common handle bar controls and translates them into CAN-BUS messages for the HD-LAN system. • Self contained small unit with all parts needed to install: OEM controls can be sold after replacement -> a good profit for the customizer! • Push-buttons or rocker switches of all kind can be used: CANIOX adapts automatically – e. g. the front light beam dimmer can be a push button. You can use visually attractive hand control switches for your projects! • All new original comfort functions (hazard warning button, clutch lever switch, head light flasher, display function button) can be realized by connection additional push buttons! • With CANIOX you can turn on the hazard warning lights by simultaneously pushing both turn indicator buttons: Although new HD models no longer have this function CANIOX will bring it back! • Front turn indicator lamps (LED without load resistor or 21 W bulbs) can be connected to CANIOX! • Enduring design: Fully waterproofed embedded circuit, large temperature range (-40°C to 100°C), protected against electro static discharge (ESD) as well as bad supply voltage according to automotive standards (including reverse battery voltage and 24 V jumper cabling)! • Time saving installation due to simple mounting: Use of OEM plug for CAN-BUS and supply voltage. Switches are simply connected to colour coded wires and all use ground signal. CANIOX supplies 4 “clean” ground connections for switches. Normally no setup necessary (just for using conventional Engine Run/Stop switches)! • High Quality product made in Germany: All modules are fully multi-tested. Support from manufacturer by E-Mail! • High investment protection due to updatable software: If CANIOX will be used for future bike models with different HD-LAN bus protocol it can be updated by the manufacturer. 619871 Caniox modul for HD CAN-Bus models 893339 Front Turn Signal Harness • Stainless steel braided and clear coated 893338 24” 893339 36” Turn Signal Extensions by Namz Cycle Products A must when installing taller bars, these practical turn signal extensions are the cleanest way to extend the wires and retain factory colors. 664137 4” turn signal extensions 664138 8” turn signal extensions 897355 4" (16-Up Softail (exc. FLSTC & FLSTN) 897356 8" (16-Up Softail (exc. FLSTC & FLSTN) 897357 12" 16-Up Softail (exc. FLSTC & FLSTN) 897358 15" (16-Up Softail (exc. FLSTC & FLSTN) ECM Connector ECM 36 Pin connector kit with connector, strain relief, retainer lock, seal, & terminals. PART# OEM# UNIT 897364 72078-00 Kit NAMZ Replacement Headlight Socket & Terminal Kit 670874 Repl. OEM 72047-71 MD Mini Solid State Relay for Hi-Low Beam Very small solid state relay for use with push buttons to switch between hi and low beam. Due to ist minimal size it can be installed inside the headlight and switches from low to high beam at the touch of a button. 30 mm x 30 mm x 15 mm (1.18” x 1.18” x 0.6”) 681573 Pushbutton Converter by Thunder Heart Performance Looking for an easy, convenient way to wire up your pushbutton hand control switches? This converter was designed to work with the CC #640331 Micro Harness Controller and most pushbutton switch hand controls. It takes the momentary signal from a pushbutton hand control switch and converts it to a standard “latching” signal that the CC #640331 Micro Harness Controller can pick up. Features include: • Solid-state construction, no relays to wear out, and is circuit protected • It’s compact... measuring just 2" x 1/2" x 1/2" so you can hide it anywhere • Simple six wire hook-up, and includes wiring diagram making installation easy 640327 Sold each 6.28

ELECTRICAL APPAREL SEATS & TOURING FOOT CONTROLS 640928 HAND CONTROLS LIGHTING Electronic Harness Controller by Thunder Heart Performance Corp. Performs all fuse, relay and flasher functions in one small module. Electronic module utilizes all surface mount technology and microprocessor which eliminates cumbersome relays and flashers. High-tech circuit interrupters replace circuit breakers for a more compact and less complicated wiring harness. Improved serviceability, using industry standard AMP and Molex connectors for reduced harness clutter. Provides more sophisticated flasher performance (signal cancel on second command, hazards, etc). Water resistant package and connectors for trouble free operation in all conditions. Diagnostic LED's indicate short/ overloaded circuits for easy troubleshooting. All connections are straight through, eliminates need for splices in the wire harness. Allows easy removal of components such as handlebars without cutting wires and optional rear turn signal flash with brakes lights. Kit includes full harness, connectors, terminals, heat-shrink tubing and wiring diagram. 640337 For under tank mounting 49206 Plug-in driver for LED indicator lamps 49207 Plug-in driver for standard incandescent indicator lamps Micro Harness Controller by Thunder Heart Performance This kit consolidates all of the electronic functions of a motorcycle (with the exception of instrumentation and engine management) into one, easy-to-hide system! Perfect for choppers and for bikes with split tanks. • Billet aluminum controller housing • Unterminated 36 position ‘fantail’ harness, shrink tubing, and all necessary connectors, and a comprehensive instruction and troubleshooting manual • Performs all fuse, relay, and signal cancelling functions in one simple package • Provides multiple flasher combinations, and all lighting functions • Reduces size, weight, and overall complexity of the electrical system • Utilizes relays to distribute all power functions, thus eliminating the need to run large wires to all the switches • Small size of controller housing allows multiple mounting locations both visible and hidden • Weather resistant connections for trouble-free use in extreme environments • Trim-to-fit harness that is adaptable on most custom bikes 640331 Micro Harness Controller Center Brake Light Module by Thunder Heart Performance Harness Micro Harness Controller EA4260 (CC #640331) incorporates turn signals, running lights, and brake lights into two rear bulbs. This simplifies the rear lighting popular with today’s custom bike builders. However, some builders wish to add a third brake light (such as a fender-mounted center brake light, or a brake light mounted on the license plate frame). The center brake light module allows the addition of such lights when using the micro harness controller. It is compatible with both LED and incandescent bulbs. The solid-state construction is fully circuit-protected and has no relays to wear out. It’s compact 2” x 0.6” x 0.5” size means you can hide it just about anywhere. The simple four-wire hook-up and included wiring diagram make installation a breeze. 640928 Center Brake Light Module ELECTRICAL EXHAUST INTAKE ENGINE GASKETS TRANNY & CLUTCH DRIVELINE WHEELS, TIRES & BRAKES Wire Plus Wiring Systems for Twin Cam Models All Wire Plus systems are available in configurations that support all stock and aftermarket Twin Cam ignition modules. There are some important factors to consider when selecting the proper wiring system for your Twin Cam model: • Year of motor: 1999 motors feature a cam position sensor not used in mid 00-01 models (Sensor Configuration) • Original Equipment or aftermarket ignition module: aftermarket ignition modules do not support the data link to connect to factory diagnostic equipment. Aftermarket ignition modules flash codes through the service engine light wiring provided in both Wire Plus systems • Bank angle sensor: must be used on stock (and early model aftermarket) ignition modules Provides all sensor connections required by Original Equipment and aftermarket ignition modules. Includes connections for M.A.P. sensor, crank sensor, bank angle sensor, ignition coil and data link. 640351 Fits all models from 99-07 640868 One Plug ignition harness to connect to later model ignition modules with only one 12 pin Deutsch connector. Includes wires and connectors for: M.A.P. sensor, crank sensor, coil, vignition module and data link. 12 V Power Connection​ PART# FITMENT OEM# UNIT 897365 14-17 Trike, 14-17 Touring 69200722 Kit FRAMES FORKS & SHOCKS SHEETMETAL INSTRUMENTS & GAUGES LUBRICANTS & CHEMICALS TOOLS & EQUIPMENT for more details check www.custom-chrome-europe.com 6.29

Can Bus Thundermax Rotor Stator Regulators Coils Wiring Connectors Lithium Battery Tuning Module Ignition System Harley Fuses Flasher Relay Control Module Load Equalizer Touring Battery Softail Battery Harley Kabelbaum Spark Plugs Harley Batterie