4 HAND CONTROLS

4 693596 693596 1“

4 693596 693596 1“ Downwards Cable Routing Handlebar Clamping System The stock clamping system on the 2015 Road Glides only allows for installation of the OEM handlebars. The clamping area is 1“ diameter, the electrical exit hole is pointed towards the front and there is a locator pin in the riser body that limits adjustability of the handlebars forward and back. Every aftermarket handlebar out there has the wire hole pointed towards the bottom. So Wild 1 fixed this problem by creating a clamping system out of T6061 billet aluminum for strength. • Comes complete with the risers and top clamp Part#: 693596 , Fitment: 15-16 FLTRUSE, 15-23 FLTRXS, 16- 19 FLTRU, 18-23 FLTRX, 18-19, 21-22 FLTRXSE, 20-23 FLTRK, 22 FLTRKSE, 23 FLTRKSEANV , Color: Aluminium, Raw , Certification: With CCE Approval , Material: Aluminium , Clamp ø: 1“ , Unit: Each , Qty.: 1 Hidden Hardware Smooth Top Clamp • Hidden hardware for a clean custom look • Precision machined from billet aluminium • Work with stock riser • For 1“ handlebars with 3.5“ center to center riser spacing • Mounting hardware included Field of Application: Fits most Big Twin and Sportster Models 74-up with 3.5“ riser spacing and offset mounting holes , Description: With mounting hardware , Material: Billet Aluminium , Clamp ø: 1“ , Unit: Each , Qty.: 1 PART# COLOR 693731 Gloss Black Powder Coated 19189 Chrome Deuce / Deluxe Handlebar Top Clamp Finally a custom top clamp that will work with the OEM risers on FXSTD Deuce & FLSTN Deluxe models. Part#: 693576 , Fitment: 05, 07-12, 14-17 FLSTN, 05-06 FLSTNI, 01-06 FXSTDI, 00-03, 05, 07 FXSTD, 13 FLSTN103, 14-15 FLSTNSE , Fitment Note: Fits OE and Wild1 Chubby risers. , Color: Chrome , Material: Billet Aluminium , Clamp ø: 1“ , Unit: Each , Qty.: 1 3“ Chubby 1 1/4“ Clamping Savage Risers • Massive 1 1/2​„ diameter base; 3“ high • Works with any bars with 11/4​„ clamping section • Includes clamp and bolts 3 1/2​„ on center mounting Field of Application: Fits most Big Twin and Sportster Models 74-up with 3.5“ riser spacing , Certification: With CCE Approval , Material: Aluminium , Clamp ø: 1 1/4“ , Height mm: 76.2 mm, Unit: Each , Qty.: 1 PART# COLOR 917201 Gloss Black Powder Coated 917200 Chrome Smooth Top Clamp • Precision machined from billet aluminium • Work with stock riser • For 1“ handlebars with 3.5“ center to center riser spacing • Mounting hardware included Field of Application: Fits most Big Twin and Sportster Models 74-up with 3.5“ riser spacing and offset mounting holes , Material: Billet Aluminium , Clamp ø: 1“ , Unit: Each , Qty.: 1 PART# COLOR 693730 Gloss Black Powder Coated 10104 Chrome 4.58

APPAREL SEATS & TOURING Sure Grip Handlebar Top Clamp • Bolt to 1“ section handlebars • For use on all pre2008 touring models • It also works well for 2008up when using apes • Included screws Part#: 894350 , Fitment: 85-23 Touring, 09-23 Trike , Fitment Note: 2008 up when using an Ape Handlebar , Color: Raw , Certification: With CCE Approval , Material: Billet Aluminium , Clamp ø: 1“ , Unit: Each , Qty.: 1 OEM Adjustable Gauge Mount for 1 1/4“ T-Bars • Adjustable Gauge relocation mount for 18-20 Street Bob & Breakout • Allows use of 1-1/4in. T-Bars and 1-1/4in. riser/ bar combo • Available in chrome or black Fitment: 18-19, 23 FXBR, 18-20 FXBRS 114, 18 FXBRS 114 ANX, 18-20 FXBB, 20-23 FXST, 21-23 FXBBS, 21-22 FXBRS , Material: Aluminium , Clamp ø: 1 1/4“ , Unit: Each , Qty.: 1 PART# COLOR 917198 Chrome 917199 Black Powder Coated FOOT CONTROLS HAND CONTROLS LIGHTING ELECTRICAL EXHAUST INTAKE OEM Gauge Mount for 1 1/4“ T-Bars • Gauge relocation mount for 18-20 Street Bob & Breakout • Allows use of 1-1/4in. T-Bars and 1-1/4in. riser/ bar combo • Available in chrome or black Fitment: 18-19, 23 FXBR, 18-20 FXBRS 114, 18 FXBRS 114 ANX, 18-20 FXBB, 20-23 FXST, 21-23 FXBBS, 21-22 FXBRS , Material: Aluminium , Clamp ø: 1 1/4“ , Unit: Each , Qty.: 1 PART# COLOR 917196 Chrome 917197 Black Powder Coated ENGINE GASKETS TRANNY & CLUTCH DRIVELINE WHEELS, TIRES & BRAKES FRAMES Lower Risers • Stylish ‘must’ for a Breakout (especially when doing a handlebar conversion due to stock pullback riser) • Works with stock upper clamp and speedometer housing • Made from forged aluminum for durability and strength • Black and Chrome finishes available • Easy installation • Comes with installation instructions and Approval documents Fitment: 18-19, 23 FXBR, 18-20 FXBRS 114, 18 FXBRS 114 ANX, 21-22 FXBRS , Certification: With Approval , Clamp ø: 1 1/4“ , Height mm: 55 mm, Unit: Pair , Qty.: 1 PART# COLOR 918353 Black 918354 Chrome Spock Risers • CNC made of Billet aluminum • Timeless design Color: Black, Anodized , Certification: With Approval , Height mm: 40 mm, Unit: Pair , Qty.: 1 PART# 894334 1“ CLAMP Ø 894335 1 1/4“ FORKS & SHOCKS SHEETMETAL INSTRUMENTS & GAUGES LUBRICANTS & CHEMICALS TOOLS & EQUIPMENT for more details check www.custom-chrome-europe.com 4.59