Handlebars, risers, riser top clamps, hand controls, grips , handlebar switches, clutch perch, cables, standard and extended throttle/idle cables, clutch cables
4 Z-Bars with TÜV
4 Z-Bars with TÜV Approval for Models 82-18 Z-Bars 3- hole 1 1/4 696261 Z-handlebar, chrome low (height 12 cm, 85 cm wide) 696262 Z-handlebar, chrome high (height 23 cm, 90 cm wide) 682350 Z-handlebar, black low (height 12 cm, 85 cm wide) 682351 Z-handlebar, black high (height 23 cm, 90 cm wide) Maynard Handlebars by Biltwell Biltwell Maynard bars are new shaped tubes with TIG welded joints. 655890 Black, (non-dimpled) 655891 Chrome, (non-dimpled) 655914 Black, (dimpled) 655915 Chrome (dimpled) Fehling Drag Bars with TÜV Chrome-plated steel drag bars available in three widths and two diameters. The 3-hole and 4/5-hole bars permit internal wiring thru the bars. 28" (72 cm) wide 84670 1", pre-82 84671 1", 82-17 86318 1", 82-17, black 84669 7/8" 22mm, for Japanese bikes 32" (82 cm) wide 84672 1", pre-82 84673 1", 82-19 86319 1", 82-19, black 86957 1", 4-hole, 82-19 687996 1", 3-hole, 82-19 36" (92 cm) wide 84674 1", pre-82 84675 1", 82-19 86320 1", 82-19, black 86945 1", 3-hole, 82-19 84678 1", 4-hole, 82-19 Zero Drag Bars by Biltwell Biltwell Zero Drags are even lower than most original equipment handlebars, so retrofitment with stock Harley cables and wiring is generally a snap. 655916 Black, (non-dimpled) 655917 Chrome, (non-dimpled) 655918 Black, (dimpled) 655919 Chrome (dimpled) 4.32
HANDCONTROLS APPAREL 912713 SEATS & TOURING 899876 FOOT CONTROLSHANDCONTROLS 912712 LIGHTING Tracker High Handlebar • Seamless CNC mandrel bent 0.120” wall 4130 chromoly tubes CABLE ROUTING OPERATION TYPE WIDTH HEIGHT PULLBACK 1“ BLACK 1“ CHROME 7/8“ BLACK 7/8“ CHROME Dimpled 762 114 63 889772 889773 Non-Dimpled 762 114 63 889770 889771 899875 899876 Non-Dimpled, 3-Hole Throttle By Wire 762 114 63 912712 912713 ELECTRICAL EXHAUST INTAKE ENGINE 912710 GASKETS TRANNY & CLUTCH DRIVELINE 899881 WHEELS, TIRES & BRAKES FRAMES 899882 FORKS & SHOCKS Tracker Mid Handlebar • 0.120“ wall (3mm) seamless 4130 chromoly tubing • CNC-machined slots for internal cable routing • Internal tube tapering on right bar end to accept TBW module CABLE ROUTING OPERATION TYPE WIDTH HEIGHT PULLBACK 1“ BLACK 1“ CHROME 7/8“ BLACK 7/8“ CHROME Dimpled 775 83 70 899881 899882 Non-Dimpled 775 83 70 899879 899880 899877 899878 Non-Dimpled, 3-Hole Throttle By Wire 775 83 70 912710 912711 SHEETMETAL INSTRUMENTS & GAUGES LUBRICANTS & CHEMICALS TOOLS & EQUIPMENT for more details check www.custom-chrome-europe.com 4.33
