Views
4 years ago

4 HAND CONTROLS

  • Text
  • Idlecable
  • Santee
  • Speedocables
  • Mirrors
  • Wireextensions
  • Throttlesleeve
  • Grips
  • Brakemastercylinder
  • Bonanzabar
  • Dragbar
  • Apehanger
  • Extendedcables
  • Clutchcable
  • Throttlecable
  • Brakelever
  • Clutchlever
  • Handcontrols
  • Risertopclamp
  • Riser
  • Harleyteile
Handlebars, risers, riser top clamps, hand controls, grips , handlebar switches, clutch perch, cables, standard and extended throttle/idle cables, clutch cables

4 1 1/4“ Chubby

4 1 1/4“ Chubby Springer Knuckle Handlebar Super low and wide for a great custom look. The bar works with the stock Springer risers. Fitment: 88-95, 97-03 FXSTS, 95-97 FXSTSB, 96 FLSTF, 97- 03 FLSTS, 01-03 FLSTSI, 01-02, 04-06 FXSTSI, 06 FLSTSCI, 07 FLSTSC, 07 FXSTSSE, 08-11 FLSTSB, 08 FXSTSSE2, 09 FXSTSSE3 , Material: Steel , Operation Type: Throttle By Wire, Throttle Cables , Bar ø: 1 1/4“ , Clamp ø: 1“ , Bar Ends ø: 1“ , Height mm: 51 mm, Width mm: 927 mm, Pullback mm: 216 mm, Cable Routing: Non-Dimpled, 3-Hole , Unit: Each , Qty.: 1 PART# COLOR CERTIFICATION 693707 Black 1 1/4“ Chubby Pullback Drag Springer Handlebar The first ever one-piece pullback drag bar that mounts directly to the Original Equipment Springer Softail front end for a more sensational custom look! The 6” pullback risers are 4 3/4” on center and feature integrated mounting assembly with built in vibration dampers. Made 1 1/4” thick with smooth polished riser welds, a brilliant show chrome finish and pre-drilled for internal wiring. Will work with the stock and most custom controls. Part#: 693570 , Fitment: 08-11 FLSTSB, 08 FXSTSSE2, 09 FXSTSSE3, 10 FLSTSE, 11 FLSTSE2, 97-03 FLSTS, 95-97 FXSTSB, 88-03 FXSTS, 01-03 FLSTSI, 01-02, 04-06 FXSTSI, 05-06 FLSTSCI, 07 FLSTSC, 07 FXSTSSE, 12 FLSTSE3 , Color: Chrome , Material: Steel , Operation Type: Throttle By Wire, Throttle Cables , Bar ø: 1 1/4“ , Clamp ø: Integrated Risers , Bar Ends ø: 1“ , Height: 152 mm, Width: 775 mm, Pullback: 279 mm, Cable Routing: Non-Dimpled, 3-Hole , Unit: Each , Qty.: 1 19195 Chrome With CCE Approval 1 1/4“ Chubby Dragster Springer Handlebar Mounts on the stock Springer risers. Center section between risers is 1 1/4” diameter to match the bars. Fitment: 88-03 FXSTS, 95-97 FXSTSB, 97-03 FLSTS, 01-03 FLSTSI, 01-02, 04-06 FXSTSI, 05-06 FLSTSCI, 07 FLSTSC, 07 FXSTSSE, 08-11 FLSTSB, 08 FXSTSSE2, 09 FXSTSSE3 , Material: Steel , Operation Type: Throttle By Wire, Throttle Cables , Bar ø: 1 1/4“ , Clamp ø: 1“ , Bar Ends ø: 1“ , Height mm: 0 mm, Width mm: 775 mm, Pullback mm: 152 mm, Cable Routing: Non-Dimpled, 3-Hole , Unit: Each , Qty.: 1 1 1/4“ Chubby Dresser Springer Handlebar A spectacular look on the Springer Heritage. The ultimate combination of comfort, control and styling. Fluid bends that provide great hand and wrist placement for optimum riding position. They work with the stock risers. Fitment: 88-95, 97-03 FXSTS, 95-97 FXSTSB, 96 FLSTF, 97- 03 FLSTS, 01-03 FLSTSI, 01-02, 04-06 FXSTSI, 06 FLSTSCI, 07 FLSTSC, 07 FXSTSSE, 08-11 FLSTSB, 08 FXSTSSE2, 09 FXSTSSE3 , Material: Steel , Operation Type: Throttle By Wire, Throttle Cables , Bar ø: 1 1/4“ , Clamp ø: 1“ , Bar Ends ø: 1“ , Height mm: 114 mm, Width mm: 876 mm, Pullback mm: 318 mm, Cable Routing: Non-Dimpled, 3-Hole , Unit: Each , Qty.: 1 PART# COLOR CERTIFICATION 693711 Black Powder Coated 10012 Chrome With CCE Approval PART# COLOR CERTIFICATION 693705 Black Powder Coated 10169 Chrome With CCE Approval 1 1/4“ Chubby Beach Springer Handlebar One of a kind custom bars specifically for Springer Softail models. Work with stock risers on all FLSTS and FXSTS models. Awesome look and fit on Heritage Springer (FLSTS) and custom bikes with Springer front end. Fitment: 88-03 FXSTS, 95-97 FXSTSB, 97-03 FLSTS, 01-03 FLSTSI, 01-02, 04-06 FXSTSI, 05-06 FLSTSCI, 07 FLSTSC, 07 FXSTSSE, 08-11 FLSTSB, 08 FXSTSSE2, 09 FXSTSSE3 , Material: Steel , Operation Type: Throttle By Wire, Throttle Cables , Bar ø: 1 1/4“ , Clamp ø: 1“ , Bar Ends ø: 1“ , Height mm: 64 mm, Width mm: 914 mm, Pullback mm: 375 mm, Cable Routing: Non-Dimpled, 3-Hole , Unit: Each , Qty.: 1 PART# COLOR 640190 Chrome 693724 Black 4.24 Attention! Articles marked with the APPROVAL-sign do not necessarily cover all H-D and Indian models and years. Before ordering please check if your bike is listed in the approval certificate. Please contact your CCE dealer or our sales support. In case of any complaints we do not grant any warranty and will not withdraw those parts.

APPAREL SEATS & TOURING FOOT CONTROLS HAND CONTROLS 895386 LIGHTING 922783 ELECTRICAL EXHAUST 922782 INTAKE 895393 ENGINE GASKETS 922785 1“ Narrow Ape Handlebar • With Approval test report §19/3 (more details, see online) • 3 holes each with 1 x slot between the risers, 1 x slot in the area of the handles • Clamping width: 130mm Certification: With Approval , Material: Steel , Operation Type: Throttle Cables , Bar ø: 1“ , Clamp ø: 1“ , Bar Ends ø: 1“ , Width mm: 700 mm, Pullback mm: 210 mm, Cable Routing: Non-Dimpled, 3-Hole , Unit: Each , Qty.: 1 PART# DESIGN COLOR HEIGHT MM 922783 Narrow Ape 30 Black Powder Coated 300 922782 Narrow Ape 30 Chrome 300 922785 Narrow Ape 40 Black Powder Coated 400 922784 Narrow Ape 40 Chrome 400 1 1/4“ Bad Ape Hanger Handlebar The Bad Ape Hanger bars come in fat 1 1/4“ tubing which is reduced to 1“ at the riser clamp area and to 1“ at the bar ends to match the common 1“ handlebar control units. Certification: With Approval , Material: Steel , Operation Type: Throttle By Wire, Throttle Cables , Bar ø: 1 1/4“ , Clamp ø: 1“ , Bar Ends ø: 1“ , Width mm: 800 mm, Pullback mm: 150 mm, Cable Routing: Non-Dimpled, 3-Hole , Unit: Each , Qty.: 1 PART# DESIGN COLOR HEIGHT MM 895386 10“ Black Powder Coated 220 895385 10“ Chrome 220 895388 12“ Black Powder Coated 260 895387 12“ Chrome 260 895390 14“ Black Powder Coated 320 895389 14“ Chrome 320 895392 16“ Black Powder Coated 360 895391 16“ Chrome 360 895394 18“ Black Powder Coated 440 895393 18“ Chrome 440 TRANNY & CLUTCH DRIVELINE WHEELS, TIRES & BRAKES FRAMES FORKS & SHOCKS SHEETMETAL INSTRUMENTS & GAUGES LUBRICANTS & CHEMICALS HD heated grips do work with Wild 1 Chubby 1 1/4“ Handlebars. You will be required to trim 3/8“ off the left tip of the bar end. This is due to the fact that the heat controller takes up room in the depth of the grip which doesn‘t allow the clutch perch to fully seat against the CHUBBY area of the bar. Same with some shorter grips. for more details check www.custom-chrome-europe.com TOOLS & EQUIPMENT 4.25

CCE Online Publication

Idlecable Santee Speedocables Mirrors Wireextensions Throttlesleeve Grips Brakemastercylinder Bonanzabar Dragbar Apehanger Extendedcables Clutchcable Throttlecable Brakelever Clutchlever Handcontrols Risertopclamp Riser Harleyteile