4 HAND CONTROLS

HAND

HAND CONTROLS APPAREL 4 893701 893700 893717 893716 Bulk Cable, Casing and Fittings Throttle Cable 893701 50ft, .047” diameter. Throttle Casing 893700 50ft, .187” in diameter. A smooth, flexible Teflon lined casing coated with black vinyl. For throttle, choke, etc. Use with .047” diameter cable. CCE #893702 ferrule is standard end cap for this casing. Clutch and Brake Cable 893717 50ft, .125” diameter. 893703 893726 893714 Cable Ends Throttle Cable Fitting 893703 For twist-grip or throttle end, .250” O.D. Brass Cable End 893726 Brass cable end .250” O.D. .125” I.D. .500” in length, for 1⁄8“ cable. Slotted Bushing 893714 1/4” O.D. for HD throttles Stainless Braiding Silicone Coating Barnett Throttle and Idle Cables for Aftermarket Carbs and Throttles Standard black PVC-coated cable for a variety of custom applications. Barnett Throttle and Idle Cables Black PVC Coated Stock diameter nylon-lined casing with 3/64" extra-flexible (7 x 7 strand) inner cable for extra long life. All cable fittings and elbows have a bright nickel finish. Silicone Coated Braided Stainless Steel The strength of stainless steel with an added silicone coating to prevent marring your bike’s finish. Barnett Clutch Cables Black PVC Coated Stock diameters with a (1 x 19 strand) 1/8" diameter inner cable. Silicone Coated Braided Stainless Steel The strength of stainless steel with an added silicone coating to prevent marring your bike’s finish. SEATS & TOURING FOOT CONTROLS HAND CONTROLS LIGHTING ELECTRICAL Clutch and Brake Casing 893716 50ft, .340” in diameter. Black vinyl jacket. Can be used with any cable to .125” diameter. CCE #893718 ferrule is the standard end cap for this casing. 893725 Clutch Clevis 893725 Used on Harley-Davidson mouse-trap clutch cables. 893704 Junction Box 893704 Designed for universal usage. Where dual carb., single cable application is desired, 2” travel. 893713 893720 Cable Covers 893720 Black, accordion-style Boot for HD clutch cables, 1987 & later Big Twins & Sportsters. 893713 Black, throttle/idle cables HD style. 893702 893718 893727 Casing Ferrules 893702 For all throttle, air, spark, .220” diameter. 893718 Standard Harley-Davidson end cap for use on Big Twins and Sportsters. Use with #893176 casing. .375” diameter. 893727 For use on 1968 and later Big Twins and 1971 and later Sportsters, clutch cables. 893715 893721 893722 893723 893719 Adjusters 893715 Mikuni carbs, 6mm x .75mm fine thread. 893721 For clutch on Big Twins thru 1967, 5/16 x 24 thread. 893722 For clutch on HD 74, 1968-1983, 3/8 x 24 thread. 893723 Clutch, adjuster as used on late Sportster, 5/16”-24 x 3”. 893719 Large, in-line adjuster as used on HD Evolution clutch cables. For S&S and Bendix Carburetor’s Adapts stock 74-80 throttles. It has a 90° elbow with 1/4"-20 threads. Casing has 6" of exposed wire. 27734 34"-long 27762 40"-long Adapts 81-85 throttles. It has a 130° elbow with 5/16"-18 threads. Casing has 6" of exposed wire. Throttle Cables 27736 35"-long 27764 41"-long Idle Cables 27765 35"-long 27766 41"-long For Mikuni 38, 40, and 44mm Carburetor’s (except Smoothbores) For Mikuni carb conversion kits. Cable includes an elbow with 6mm fine thread so that it can be securely fitted to carb, not just a slip fit like others. Casing has 5" of exposed wire. Carb and throttle fittings are attached, no trimming or modifications needed. 27732 38"-long 27733 44"-long Adapts stock 74-80 throttles. Casing has 4 1/2" of exposed wire. 27735 35"-long 27763 41"-long For Mikuni HS42/45 Carburetor’s. 27793 Throttle cable. Using 81-95 throttle, 36"-long 27794 Idle cable. Using 81-95 throttle, 37"-long 27795 Throttle cable. Using 96-13 throttle, 36"-long 27796 Idle cable. Using 96-13 throttle, 37"-long Note: Applications listed here are for early Mikuni kits. Kits manufactured after May of 99 use Original Equipment cables. For Qwiksilver Carburetor's 27797 Throttle cable. Using 81-95 throttle, 39"-long 27798 Idle cable. Using 81-95 throttle, 39"-long 27799 Throttle cable. Using 96-13 throttle, 39"-long 27802 Idle cable. Using 96-13 throttle, 39"-long For Universal Throttles Adapts universal throttles to stock Keihin carburetor's from 75-89 (except 88-89 Sportster models). 27730 40"-long (stock length) 27731 46"-long (+6") 27791 48"-long (+8") Adapts universal throttles to Mikuni carburetor’s. 27792 38"-long casing with 5" of exposed wire (8"-longer than stock) EXHAUST INTAKE ENGINE GASKETS TRANNY & CLUTCH DRIVELINE WHEELS, TIRES & BRAKES Elbows Throttle 893708 Dual cable models. 5/16-18 thread, 130° bend. 893707 Dual cable models. 5/16-18 thread, 90° bend. 893711 96 & up Harley-Davidson, 90° bend. 893712 96 & up Harley-Davidson, 130° bend. Idle 893705 1/4-20 thread, 90° bend. 893706 Dual cable models. 1/4-20 thread, 130° bend. 893709 96 & up Harley-Davidson, 90° bend. 893710 96 & up Harley-Davidson, 130° bend. 893724 Cable Clamp 893724 Fitted to hand lever for emergency or permanent use. Can also be used on Hydra-Glide. Easy to install. .460” O.D. Barnett Black Vinyl Speedometer and Tachometer Cables Speedometer Cables 27761 Fits 73-78 FX, FXS; 86-94 FXR, 94 FXRS;93-94 FXRS/SP/Conv., 94 FDXS Conv.; 83-85 XLX; 86-87 XL883/1100, 84-85 XLH (40"-long, 16 mm nut) 27768 Fits 88-94 XL883/1200, 87-92 FXRS-SP/FXRS Conv., 84-85 XLS, 83-85 FXR (43"-long, 16 mm nut) 27769 Fits 84/86-94 FXRT, 83 XLS; 86 FXRD/FXWG (47"-long, 16mm nut) 27784 Fits 84-94 FL/Softail/Dyna Glide models, 82-83 FXR, 80-92 Sportster models (40"-long, 12 mm nut) 27785 Fits 87-95 FLTC/FLTCU/FLHS/FLST/FLSTC/ FLSTF/Heritage Softail (35"-long, 12 mm nut) 27786 Transmission drive cable for 4-speed FL/FX models (36"-long, 5/8"-18 nut) 27787 Transmission drive cable for 65-69 Sportster models (46"-long, 5/8"-18 nut) 27788 Transmission drive cable for 70-73 Sportster models (46"-long, 16 mm nut) Tachometer Cables 27789 Fits 74-80 Sportster models (33"-long, 12 mm nut) 27790 Fits 70-73 Sportster models (32"-long, 16 mm nut) FRAMES FORKS & SHOCKS SHEETMETAL INSTRUMENTS & GAUGES LUBRICANTS & CHEMICALS TOOLS & EQUIPMENT 4.170 for more details check www.custom-chrome-europe.com 4.171