Views
7 months ago

19 TOOLS & EQUIPMENT

  • Text
  • Cruztools
  • Toolbox
  • Wrench
  • Tools
  • Wrench
  • Dongle
  • Diagnostic
  • Screws
  • Kits
  • Down
  • Tools
  • Tools
  • Tools
  • Hebebuehne
  • Lift
  • Ramps
  • Stand
  • Atal
  • Actia
  • Diagnostic
Tools, ramps, tie down straps, motorcycle locks, motorcycle lifts, shop dollies, battery chargers, tool kits (road side repairs), torque wrenches, specific engine tools, engine stands, bearing tools, diagnostic tools, screws

Chrome Brake Rotor, Drum

Chrome Brake Rotor, Drum and Sprocket Hardware Chrome-plated bolts and where required, nylon insert backing nuts. The finest American-made quality by Colony. A B C D E F G N O P Q H K L I J M Brake Rotor Kits Style Part # Description A 36233 B 36230 C 36232 D 36225 Front or rear rotor to hub for 82-85 FLT models (repl. OEM 1642) 7/16"-14 x 1.75" countersunk Rear rotor to hub screw and nut kit for 79-91 Sportster and FX models, and 81-84 FL models with spoke or cast wheels (repl. OEMs 31605 and 31604) 3/8“-16 x 1.5“ countersunk (set of 5) Front or rear rotor to hub screws for 80-81 FLT models (repl. OEM 1643) 7/16"-14 x 1.25" countersunk Front rotor to hub screw and nut kit for 78-83 FXWG models (dual disc requires 2 sets) 5/16"-18 x 1" countersunk E 25193 Replacement countersunk bolt (pack of 10) F 36228 G 35657 H 36226 I 36227 J 35660 K 36231 L 36229 Rear Brake Drum Kit M 36324 Sprocket and Pulley Kits N 36114 O 36113 P 36112 Q 35659 Q 35658 — 72059 — 72060 — 72061 Front rotor to hub screws for single disc FX and Sportster models from 74-77. 1/4“-20 x 5/8“ countersunk (set of 5) Rotor to hub screws for FX models 74-80, and Sportster models from 74-77. 5/16"-18 x 1.25" countersunk Front or rear rotor to hub thin hex head bolt and nut kit for rear of FL models 73-80, front on FL models 73-74 and front on FX and XL models 73 (Repl. OEM# 41198-73) 3/8“ -16 x 1“ thin hex. (set of 5) Same as CC #36226 but with buttonhead screws instead of hex (set of 5) Rear cast wheel rotor to hub for FX and FL models 79-91 and XL models 79-96. 3/8"-16 x 1" buttonhead Front rotor to hub screw and nut kit for Softail and FXWG models 84-17. 5/16“-18 x 7/8“ buttonhead (set of 5) Front rotor to hub screws for FX, FXR, Sportster and FLT from 84-17 (dual disc requires 2 sets). 5/16“-18 x 7/8“ buttonhead (set of 5) Rear brake drum bolt and nut kit special shouldered bolts and locknut for 52-78 XL models with rear drum. 5/16"-24 special hex Sockethead bolt and nut kit for FXWG and FXRS models from 85-92 with belt drive and spoke rear wheel (repl. OEM 4726) Sockethead bolt and nut kit for FL, FX, and XL models with chain drive spoke rear wheel from 73-92 (repl. OEM 41197-73) Sockethead bolt and washer kit for FL and FX models from 73-98 and Sportster models 73-90 with cast rear wheel and belt drive (repl. OEM 3769) Bolt, nut and washer kit with special domed hex bolts for FX, FL and XL models from 73-03 with spoke rear wheels Bolt and washer kit with special domed hex bolts for FX and FL models from 73-98 with cast rear wheels Custom hardware kit with flat sockethead screws, countersunk washers and locknuts. Fits FL, FX and Sportster models with chain drive and spoked wheels from 73-92 Custom hardware kit with flat sockethead screws and countersunk washers. Fits FL, FX and Sportster models with belt or chain drive and cast wheels from 73-98 Custom hardware kit with flat sockethead screws, countersunk washers and locknuts. Fits FXWG and FXRS models with belt drive and spoked wheels from 85-99 19 19.60 Inspection Cover Chrome Screw Kit This custom countersunk screw kit permits you to fit all Original Equipment and aftermarket inspection covers with countersunk holes to models with forward controls from 89-97. You use the four short screws on models from 89-93, and two long and two short screws on models from 94-97. 58686 Complete kit Chrome Rear Fender Strut Mounting Kits by Colony Kits include everything necessary for mounting fender struts. 35165 For mounting four hole struts on Fat Boy and Heritage Softail models from 86-99 (repl. OEM 59969-86) 35164 For mounting six hole struts on Springer, Custom and Bad Boy models from 86-99 (repl. OEM59954-86) Complete Rocker Box Hardware Kit Full 32 piece rocker box mounting kit contains everything needed to install two rocker boxes. Fits all Evolution Big Twin and Sportster lower rocker boxes. 94053 Complete Evo rocker box hardware kit.

TOOLS & EQUIPMENT APPAREL SEATS & TOURING FOOT CONTROLS HAND CONTROLS LIGHTING ELECTRICAL Custom Chrome Engine and Cover Sets Chrome-plated components in kits for specific applications by year and model. Most kits are available in chrome-plated knurled sockethead hardware, or with the head polished smooth before plating. Some kits may contain hex or buttonhead hardware where sockethead hardware is not appropriate. EXHAUST Complete Motor Kits for Sportster Models Application 91-03 XL models 86-90 XL Evolution models 77-E84 XL models 71-76 XL models 57-69 XLCH 67-70 XLH and 70 XLCH Description Side Cover Kits for Sportster Models Application 91-03 XL models Upper and lower front and top center motor mounts, rocker box, primary, inspection, crankcase, shifter, cam, sprocket cover, rear master cylinder mount, right side crankcase, timing hole plug and point cover Cam, primary, rocker box, lifter base, top motor mount, oil filter mount and point cover Cam, primary, rocker box, lifter base, top motor mount, point/magneto cover and generator mount Cam, primary, rocker box, lifter base, top motor mount, generator mount, sprocket cover and point cover Cam, primary, lifter base, magneto cover, generator, sprocket cover, rocker box and top motor mount Cam, primary, magneto cover, top motor mount, lifter base, sprocket cover, rocker box and generator mount Description Right side; cam cover, crankcase, sprocket cover and rear master cylinder mount 36380 Smooth 36379 Knurled 36358 Smooth 36338 Knurled 25088 Knurled 36356 Smooth 25087 Knurled 36374 Smooth 25086 Knurled 25085 Knurled 91-03 XL models Left side; crankcase and inspection covers and shifter bolt 36376 Smooth 36375 Knurled 86-92 XL models Cam, primary and oil fill check screw 36368 Smooth 77-85 XL models Cam, primary, sprocket cover and oil fill check screw 25094 Knurled 71-76 Sportster models Cam, primary and oil fill check screw 25093 Knurled Complete Motor Kits for Big Twin Models Application 87-93 Big Twins (except Softail and Dyna Glide models) 89-98 Softail and Dyna Glide models 87-88 Softail models Description Cam, primary, rocker box, lifter base, inner primary, timing plug, motor mounts and point cover Cam, inner and outer primary covers, point cover, timing plug, rocker box, lifter base, top motor mount, Cam, primary, rocker box, lifter base, inner primary, timing plug, motor mounts and point cover 36351 Smooth 36341 Knurled 36353 Smooth 36352 Knurled 36350 Smooth INTAKE ENGINE GASKETS TRANNY & CLUTCH DRIVELINE WHEELS, TIRES & BRAKES FRAMES FORKS & SHOCKS SHEETMETAL INSTRUMENTS & GAUGES LUBRICANTS & CHEMICALS TOOLS & EQUIPMENT for more details check www.custom-chrome-europe.com 19.61

CCE Online Publication

1 APPAREL
2 SEATS & TOURING
3 FOOT CONTROLS
4 HAND CONTROLS
5 LIGHTING
6 ELECTRICAL
7 EXHAUST
9 ENGINE
10 GASKETS
11 TRANNY & CLUTCH
12 DRIVELINE
13 WHEELS, TIRES & BRAKES
14 FRAMES
15 FORKS & SHOCKS
16 SHEETMETAL
17 INSTRUMENTS & GAUGES
19 TOOLS & EQUIPMENT
01-2019 Rhine Time
02-2019 10 Years Anniversary BOAR Bikes
01-2018 BOAR Bike Fusion
03-2018 BOAR Bike CCEagle
05-2018 BOAR Bike CrossBob
04-2018 BOAR Bike H9 Sportster
2014 BOAR Video Sexy Thing
2015 BOAR Video THIS_IS
2017 BOAR Video AT NIGHT
2016 BOAR Ride Video Ride Unrivalled
02-2018 MBE Verona Bikeshow
03-2018 European Bike Week Faak
2016 CC-Riders
CCE SPECIAL FEATURE Cafe+Dirt Track
Cruztools Teardrop Toolbox Torque Wrench Thread Cutting Tools Oxygen Sensor Wrench Tuning Dongle Serial Diagnostic Harley Screws Screw Kits Tie Down Twin Cam Tools Evolution Tools Harley Engine Tools Hebebuehne Motorcycle Lift Ramps Engine Stand Atal Actia Motorcycle Diagnostic