601800 675704 675705 601803 Pro Image I & II Chopper Gas Tanks The latest and greatest one-piece chopper gas tanks available! Fabricated from heavygauge steel with 4.1 or 4.7 gallon capacities. Compliments chopper frames with 4" downtube stretch and 3" backbone stretch. Backbone outer diameter cannot exceed 1 3/4". Available with flush or raised cap. Includes rubber mounted weld-on brackets. Pro Image II Chopper Gas Tanks 675704 4.1 gallon with flush cap, L - 23.5”, W - 12”, H - 10” 675705 4.7 gallon with raised cap Special Flush Mount Pop Up Gas Cap 675706 Fits CCI 675704, and 675705 Stretched ‘Super Cruiser’ Steel Gas Tanks for Custom Applications • Made of heavy-gauge steel for maximum strength and durability. • Designed to use pop-up caps or bolt-in cap kits. • Tank must be fitted to frame before painting. • Available in a 3.5 gallon with 2" or 5" stretch. 601800 3.5 gal. tank with 2" stretch made for pop-up cap, L- 23.5”, W- 13.5”, H - 9” 601801 3.5 gal. tank with 2" stretch made for bolt-in cap, L- 23.5”, W- 13.5”, H - 9” 601802 3.5 gal. tank with 5" stretch made for pop-up cap, L- 25.25”, W- 14”, H - 8” 601803 3.5 gal. tank with 5" stretch made for bolt-in cap, L- 25.25”, W- 14”, H - 8” Custom Pop-Up Gas Caps 47775 Stainless Steel 47777 Chrome 16 Aircraft-Style Bolt-In Gas Caps Comes with mounting ring, gasket, screws and cap. 08661 Chrome, Locking vented cap kit 08660 Chrome, Non-locking vented cap kit XL Flat Bottom Sportster Tanks by Paughco Traditional Sportster tanks but modified for universal applications with horseshoe front mounts and tab rear mounts. They are equipped with a bung to accept late model 22mm petcocks and screw-in style gas caps. Made in the USA. 632933 XL Flat Bottom Gas Tank. 2.9 gals. Custom “Low Tunnel” Gas Tank This 2.8 gallon custom tank features a 1 1/2"-high tunnel with universal style mounts for custom applications. Accepts 3/8" NPT threaded petcock. Tank measures 15 1/2"-long x 9"-wide x 7"-high with a 1 1/2" tunnel. 260121 Unpainted steel (Bajonett) Note: All fuel tanks should be test fitted, pressure tested, and pre-sealed before painting. 16.68 Note: Fuel tanks, must be pressure tested and sealed before painting to protect the final finish and prevent internal rust.
APPAREL SEATS & TOURING 19639 FOOT CONTROLS ‘Peanut’ Tank for Sportster Models A quality reproduction of the Original Equipment 2.4 gallon gas tank. 12724 Fits early Sportster and K models from 55-78 Note: All fuel tanks should be test fitted, pressure tested, and pre-sealed before painting. 629446 HAND CONTROLS LIGHTING ELECTRICAL EXHAUST Smooth-Bottom Tanks for Sportster Models An updated design with a 3.3 gallon capacity and rounded lower edges. Very similar to the latest factory design, but with petcock locations and mounts for early or late frames. Includes mounting hardware. 15664 Fits Sportster models from 82-94 650246 ‘King’ Tanks for Early Sportster Models 2"-wider than the ‘Standard’ tank... enough to give extra mileage and just wide enough to make them look great. These high tunnel tanks are equipped with stock mounts but do not include mounting hardware. They have a 3.1 gallon capacity. 3/8" NPT Fuel Inlet. 19639 Fits all models from 55-78 25574 Fits all models from 79-81 650246 Fits all models from 82-94 Stretched 4 Gallon Tank for Late Sportsters If you are looking for more range or just want to set your Sporty apart from all the others this is the tank for you. Accepts the stock fuel pump, available with or without indents. Some seats may require slight modification (stock solo seat works). 629446 Stretched 4 gal tank, screw bung, indented fits 07-20 Sportster, except 08-10 XR1200, 10-13 XR 1200X INTAKE ENGINE GASKETS TRANNY & CLUTCH DRIVELINE WHEELS, TIRES & BRAKES Rubber Mounted 'King' Tank for Sportster Models Classic good looks of the original ‘Peanut’ tank, but with increased capacity for an extended cruising range. We took our best-selling 3.25-gallon capacity ‘King’ tank and added rubber mounts to the front and rear. By isolating the tank, we’ve reduced stress on the tank mounts for increased durability. Require vented screw-type gas caps. 25573 Fits Sportster models from 82-94 Fat-Bob Style Tanks For 04-06 Sportsters Stock replacement tank for 04-06 Sportster models with rubber mounted engines. They feature an offset, stockstyle screw in with vent and have a standard 22mm external thread petcock installed on the left side. Each tank includes threated hose line fittings for the vent bung on the bottom right-side of the tank. They attach to the stock frame mounting points and have a 4,5 gallon capacity. 653129 4,5 gallon gas tank (gas cap not included) Stretched One-Piece Fat Bob Gas Tanks for Sportster Models • Features a 2"-stretch • 3.5 gallon capacity • Available in smooth-top versions ONLY • Single or dual screw-in caps (not included) • Single or dual flush aircraft-style caps with locks are included Smooth-Top for Late Models Fit all Sportster models from 82-03 (except XL1200S models). 15673 With a single screw-in bung 15218 With dual flush locking caps 15219 With a single flush locking cap FRAMES FORKS & SHOCKS SHEETMETAL INSTRUMENTS & GAUGES LUBRICANTS & CHEMICALS TOOLS & EQUIPMENT for more details check www.custom-chrome-europe.com 16.69
