Views
6 months ago

15 FORKS & SHOCKS

  • Text
  • Airride
  • Suspension
  • Tubes
  • Kits
  • Cartridge
  • Legs
  • Assemblies
  • Covers
  • Shrouds
  • Gabel
  • Tree
  • Tieferlegung
  • Lowering
  • Kits
  • Oehlins
  • Springer
  • Gabel
  • Tubes
  • Trees
  • Shocks
Forks and shocks, lowering kits front and rear, fork braces, fork covers, billet fork lower ends, fork tubes, triple trees

25327 25240

25327 25240 15160172 Upper bushing (repl. OEM 45940-84) 15.40 160044 160045 Seal Retaining Rings Sold in 10 packs. 160044 Fits FXR and Sportster models with 39 mm forks from 87-19 (repl. OEM 45905-87) 160045 Fits FX, FXR and Sportster models with 35 mm Showa forks from 75-87 (repl. OEM 45908-80) Seal Retaining Rings An accurate reproduction of the Original Equipment part. Fits 80-86 FXWG; Softail and Dyna Wide Glide models from 84-Up; 49-84 4-speed FLs, and 80-13 FLT/FLHT models. 09631 Fork seal retaining rings (repl. OEM 45842-77) pack of 10 160173 Fork Tube Bushings for 39 mm Front Ends Fits 39 mm forks used on Sportster, FXR and Dyna Glide models (except FXDWG) from 87-17. Sold in pairs. 160173 Upper bushing (repl. OEM 45461-87) 160174 Lower bushing (repl. OEM 45465-87) 160170 160172 Fork Tube Bushings with Teflon Coating for 41 mm Front Ends Fits all models from 84-17 with 41 mm forks. Sold in pairs. 160170 Lower bushing (repl. OEM 45866-84) Complete Rebuild Kit for 49mm Forks This comprehensive rebuild kit contains everything necessary to rebuild a leaking 49mm front end from the bottom up. 688661 Rebuild kit for 49 mm forks 25239 Fork Slider Bushings Upper and lower fork slider bushings for most Wide Glide front forks. For Models from 49-E77 Fit all models with FL front fork sliders, and are of the correct rolled type, steel backed with full surface bronze interior facing. Lower bushing bronze face features a spiral oil groove for smoother fork action and additional lubrication. 25239 Lower bushing (sold each) 25240 Upper bushing (sold each) 25327 Felt washer, upper oil seal (pack of 10) For Models from 84-17 with 41mm forks Fit the front sliders on all Wide Glide fork assemblies 84-17 with 41mm forks. 09272 Lower bushing (repl. OEM 45866-84) sold each 09271 Upper bushing (repl. OEM 45940-84) sold each 41 mm Fork Slider Assembly/ Rebuild Kit Complete high quality kit includes all necessary bushings, seals, washers and clips to assemble or rebuild a set of 41 mm fork legs. 688308 Fits all front ends from 84-17 Adjustable Split Fork Seal Driver Set by K&L Supply Replace fork seals without removing the inner fork tube from the T-clamp. Set includes: one Split Seal Driver and three Seal Guides 35mm, 39mm, 41mm. 400349 Fork Seal Installer. Use on 35mm, 39mm, and 41mm fork tubes Motor Factory Fork Seals and Rebuild Kits Fork seals only or kits that include a pair of fork seals, and necessary washers to rebuild forks to like new performance. For Sportster, Dyna Glide, FX and FXR Models Seals (pack of 10) 54373 Fit Sportster and FX models from 73-76 with Kayaba forks (repl. OEM 45927- 73) 54376 Fit Sportster, FX and FXR models from 75-83 with Showa forks (repl. OEM 45400-75) 54383 Fit Sportster, FX and FXR models from 84-87 with 35 mm Showa forks (repl. OEM 45387-83) 54387 Fit Sportster, Dyna Glide and FXR models from 87-17 with 39 mm Showa forks (repl. OEM 45378-87) Rebuild Kits 19494 Fits Sportster and FX models from 71-72 25383 Fit Sportster, FX and FXR models from 75-83 with Showa forks (repl. OEM 45400-75) 25384 Fit Sportster, FX and FXR models from 84-87 with 35 mm Showa forks (repl. OEM 45387-83) 25387 Fit Sportster, Dyna Glide and FXR models from 87-17 with 39 mm Showa forks (repl. OEM 45378-87) For FL, FLT/FLHT, 4-Speed FXWG, Softail and Dyna Wide Glide Models Seals (pack of 10) 54349 Fit FL models 49-E77 (repl. OEM 45852- 48) 54377 Fit FL models late 77-84, FXWG and FLT/FLHT models from 80-83 (repl. OEM 45843-77) 54384 Fit FLT/FLHT, 4-speed FXWG, Softail and FXDWG (except 06-17) models from 84-17 (repl. OEM 45875-84), (41mm) Seals (pack of 5) 160225 Fits FLT, FLST, FXWG and FXST models 84-99. (repl. OEM 45875-84) Rebuild Kits 19362 Fit FL models 49-E77 (repl. OEM 45852- 48) 25330 Fit FL models late 77-84, FXWG and FLT/FLHT models from 80-83 (repl. OEM 45843-77) 25385 Fit FLT/FLHT, 4-speed FXWG, Softail and Dyna Wide Glide models from 84-05 (repl. OEM 45875-84) seal and retainer clip only 160066 Fits FXST, FLST, FXWG and FXDWG models from 84-99. (repl. OEM 45849- 84)

FORKS & SHOCKS APPAREL SEATS & TOURING Tracker FXD 06-17 (except FXDF, FXDWG, FLD) 688685 FOOT CONTROLS HAND CONTROLS LIGHTING Tracker Narrow XL 88-17 (except XL1200X 10-17, XL883L 11-17, XL1200C 11-17), FXR 88-94 and FXD 93-05 688684 ELECTRICAL EXHAUST Tracker Wide FXST 84-17, FLST 84-17, FXDWG 93-05 Fork Truss When the front fender is removed from the stock forks it may look good but you end up with a “flexy flyer” that twists and sways more than a drunken sailor. We found this out when we started putting wide, 21” wheels on our Softails. Bring the performance back by keeping your front wheel going in the direction you point it. Tracker FXD 06-17 (except FXDF, FXDWG, FLD) 896016 Gloss Black 896017 Black Ops Tracker Narrow XL 88-19 (except XL1200X 10-19, XL883L 11-19, XL1200C 11-19, 93-05 FXDWG), FXR 88-94 and FXD 93-05 896018 Black Powdercoat 896019 Black Ops Tracker Wide FXST 84-17, FLST 84-17, FXDWG 93-05 896020 Black Powdercoat, 896022 Black Ops 688687 688686 Fork Braces for Narrow and Wide Glide Forks These custom front fork braces are made from laser cut 3/16“ thick steel, allows removal of the front fender and increases rigidity to the front fork better than stock, eliminating any fork twist while safeguarding the integrity of the suspension. The custom styling looks great on any motorcycle, available in black or chrome finish, for use with 19“ & 21“ wheels & tires. Narrow Glide & Wide Glide kit applications available, mounting hardware supplied, sold each. 688684 Black, Fork brace for Wide Glide 688685 Chrome, Fork brace for Wide Glide 688686 Black, Fork brace for Narrow Glide 688687 Chrome, Fork brace for Narrow Glide, Sportster 88-15 & FXR/FXD 88-05 Tomahawk Fork Brace with Billet Mounting Brackets for Dyna Models This fork brace is laser cut from 3/16” thick steel and replaces the front fender on your bike while increasing rigidity to the front fork for a more stable ride. Available in either a chrome-plated or gloss black powder coated finish. Designed to work with either a 21” or 19” wheel. Kits come complete with fork brace, mounting brackets and all necessary hardware. Will fit all 06-17 Dyna Models with 49mm forks except FXDWG, FXDF, FLD moels. 688750 Chrome Tomahawk fork brace, fits all 06-17 Dyna models with 49 mm forks 688751 Black Tomahawk for brace, fits all 06-17 Dyna models with 49mm forks Fork Braces for Narrow Gilde Forks by ODC Compatible with 19“ and 21“ front wheel. 618391 For Sportster 88-19 and FXR/ 91-05 FXD 88-05 except 16-19 Forty Eight, 93-05 FXDWG INTAKE ENGINE GASKETS TRANNY & CLUTCH DRIVELINE WHEELS, TIRES & BRAKES FRAMES FORKS & SHOCKS SHEETMETAL INSTRUMENTS & GAUGES LUBRICANTS & CHEMICALS TOOLS & EQUIPMENT for more details check www.custom-chrome-europe.com 15.41

CCE Online Publication

1 APPAREL
2 SEATS & TOURING
3 FOOT CONTROLS
4 HAND CONTROLS
5 LIGHTING
6 ELECTRICAL
7 EXHAUST
9 ENGINE
10 GASKETS
11 TRANNY & CLUTCH
12 DRIVELINE
13 WHEELS, TIRES & BRAKES
14 FRAMES
15 FORKS & SHOCKS
16 SHEETMETAL
17 INSTRUMENTS & GAUGES
19 TOOLS & EQUIPMENT
01-2019 Rhine Time
02-2019 10 Years Anniversary BOAR Bikes
01-2018 BOAR Bike Fusion
03-2018 BOAR Bike CCEagle
05-2018 BOAR Bike CrossBob
04-2018 BOAR Bike H9 Sportster
2014 BOAR Video Sexy Thing
2015 BOAR Video THIS_IS
2017 BOAR Video AT NIGHT
2016 BOAR Ride Video Ride Unrivalled
02-2018 MBE Verona Bikeshow
03-2018 European Bike Week Faak
2016 CC-Riders
CCE SPECIAL FEATURE Cafe+Dirt Track
Airride Air Suspension Damper Tubes Slammer Kits Fork Cartridge Lower Legs Lower Leg Assemblies Forktube Covers Fork Shrouds Gereckte Gabel Raked Triple Tree Tieferlegung Shock Lowering Lowering Kits Oehlins Springer Springer Gabel Fork Tubes Triple Trees Shocks