3 years ago


  • Text
  • Airride
  • Suspension
  • Tubes
  • Kits
  • Cartridge
  • Legs
  • Assemblies
  • Covers
  • Shrouds
  • Gabel
  • Tree
  • Tieferlegung
  • Lowering
  • Kits
  • Oehlins
  • Springer
  • Gabel
  • Tubes
  • Trees
  • Shocks
Forks and shocks, lowering kits front and rear, fork braces, fork covers, billet fork lower ends, fork tubes, triple trees

13040 Custom Chrome Fork

13040 Custom Chrome Fork Conversion Kits Kits to convert Showa front ends to the look of a Wide Glide front fork without the expense. Kits include: chrome-plated forged triple tree set with lower clamp cover, chrome headlight mount, special chrome fork tube plugs, chrome fork stop, chrome stem nut, chrome axle and axle spacer, and chrome fender spacers to permit the use of the stock fender. The 77-83 Dual Disc kit includes two chrome rotor spacers with hardware; 84-99 kits include one rotor spacer and a chrome hubcap. 13032 Fits all Sportster and FXR models (except FXLR models) with a single disc and 39 mm forks from 87-99 13040 Fits all dual disc FX models from 77-83 (shown) Custom 7 Degree Rake Triple Trees These billet custom triple trees are CNCmachined from high strength aircraft billet aluminum and finished with hand polishing or triple chrome-plating. The top tree accepts stock handlebar dampeners and features counterbores on both sides that conceal the seam of the tube caps for a clean custom look. The bottom tree comes compete with stainless steel fork stops that resist corrosion and allow installation with 3.5 or 5 gallon Fat Bob tanks. The 7° rake angle is engineered to accept the Wide Glide or Softail 41 mm fork tubes and headlight assembly. Fit FL models from 49-84, FXWG models from 80-86, Softail models from 84-99 and custom FX, XL applications (1" stem). 160526 Chrome Chrome ‘Smooth’ Triple Tree Set Styled after their early FL model counterparts, these custom trees feature late-model rubber handlebar bushings and chrome pinch bolts. The fork slider cover tabs have been removed and the outer edges have been polished to give a smooth, clean look. Includes a lower triple tree cover like the one found on FXWG and Softail models, and it’s held in place with your bottom headlight mounting bolt. 13029 Fits all 4-speed Big Twin and Softail models from 49-99, TÜV 15 Early Big Twin Triple Trees Fit all 4-speed Big Twin models from 49-99. 15.10 Styled after 60-84 triple trees and drilled and tapped for slider covers and early headlight, but with late-style, 4-piece rubber handlebar bushings. 13027 Chrome set 13028 Black set 13056 Chrome upper clamp only 13057 Chrome lower clamp only 13059 Black lower clamp only Note: The top trees are not drilled and tapped on the backside for headlight tins. Bottom trees have no padlock tab. 13057 and 13059 include stem. Chrome Triple Tree Sets Chrome replacement triple tree sets include upper and lower tree, pinch bolts, and dust cover. Completely interchangeable with Original Equipment trees. 13090 Fits FL Softail models from 84-99, TÜV 13091 Fits FX Softail models from 84-99 and aftermarket cast neck frames, TÜV Components for FL Softail Models Individual upper and lower trees for all models from 86-99 (except FLSTS). 09330 Upper (repl. OEM 45456-86A) 09331 Lower (repl. OEM 45605-88), TÜV Components for FX Softail Models Individual upper and lower trees for FX Softail models from 84-99 and aftermarket cast neck frames 100132 Upper (repl. OEM 345672-80) 100118 Lower (repl. OEM 45665-80A and 45665-84A) Upper Triple Tree Clamp for Blackline Models with TÜV Made of billet aluminum with TÜV approval, for FXS models 11-13 (41,2 mm ø) , black. Includes a speedo bracket (for OEM speedo), riser mounting hardware for 1/2” risers and offers the possibilty to use aftermarket risers and handlebars. 619636 Upper triple tree The triple trees on this page will fit models up to 2011 if the fork lock is not used or a notch for the fork lock is machined into the stem.

FORKS & SHOCKS APPAREL SEATS & TOURING FOOT CONTROLS HAND CONTROLS LIGHTING ELECTRICAL EXHAUST INTAKE ENGINE GASKETS TRANNY & CLUTCH Thunderbike 26” Touring Kit with Tüv Update your Bagger with this combination of 26“ front wheel and the triple tree for Touring models 09-17. Several front wheel finishes are available below as well as matching brake rotors. All parts are TÜV approved! 619406 Triple tree for Touring models 09-13 (except Road King and Road Glide models) 619564 Triple tree for Road King models 09-13 619407 Thunderbike front wheel „Daytona“ 3.75x26, bicolor dual flange incl. hub and bearings 619409 Thunderbike front wheel „Daytona“ 3.75x26, black gloss dual flange incl. hub and bearings 619410 Thunderbike front wheel „Daytona“ 3.75x26, flat black dual flange incl. hub and bearings 619405 Brake rotor Vegas, 300 mm 619565 Touring steel front fender for 26” front wheels Note: Wheels are no stock items and will be ordered on demand When OEM brake discs will be re-used you need to drill the holes to 10 mm. The included brake rotor screws are metric thread and MUST be used! DRIVELINE WHEELS, TIRES & BRAKES FRAMES FORKS & SHOCKS SHEETMETAL INSTRUMENTS & GAUGES Bolt-On Bagger Rake Kit Daytona for Harley-Davidson Touring Models Allows the use of 26” front wheels without changing height and angle of the fairing. The distance between rider and fairing is almost the same than stock. Available for Road Kings too! 607925 For Street Glide/E-Glide models 14-19 607926 For Road Glide models 15-19 for more details check LUBRICANTS & CHEMICALS TOOLS & EQUIPMENT 15.11

Airride Air Suspension Damper Tubes Slammer Kits Fork Cartridge Lower Legs Lower Leg Assemblies Forktube Covers Fork Shrouds Gereckte Gabel Raked Triple Tree Tieferlegung Shock Lowering Lowering Kits Oehlins Springer Springer Gabel Fork Tubes Triple Trees Shocks