Views
4 years ago

11 TRANNY & CLUTCH

  • Text
  • Forks
  • Clutch
  • Clutchlite
  • Pull
  • Clutch
  • Clutch
  • Covers
  • Transmission
  • Paw
  • Shaft
  • Ratio
  • Transmission
  • Getriebe
  • Kupplung
  • Kupplung
  • Clutch
  • Clutch
  • Countershaft
  • Mainshaft
  • Transmission
Complete transmissions, 4-, 5-, 6-Speed transmissions, transmission parts, gears and bearings, clutch parts, friction plates, steel plates, gear sets

15908 15909 15906 Clutch

15908 15909 15906 Clutch Lever Rods and Ends Rods 15906 For use with Mousetrap and Suicide setup (repl. OEM 36918- 52) 22 3/8"-long 15908 Fits old-style rocker clutch from 36-51 (repl. OEM 36917-36) 18 3/8"-long Clutch Lever Rod End Used on CC #’s 15906 and 15908 clutch rods. 15909 Repl. OEMs 36916-36, 36916-52 5-Speed Clutch Release Lever Set A complete chrome-plated clutch release 11lever set for all 5-speed models from 80-86. This single kit replaces the four separate Original Equipment clutch release arms that the factory has used since 80. Replaces the stock release arm and cable bracket with a stronger, forged release arm and die-cast transmission top cable bracket. Chrome mounting hardware and acorn nut included. 18438 Replaces OEM 37063-90T Note: The installation of this part on 80-82 FXR and FLT models will also require the installation of an OEM 38599-83A clutch cable which is routed along the left side of the engine instead of the right. See the CC cable charts in Section 4 for the different styles of cables available. Chrome Clutch Release Lever For all Big Twins up to early 79 with stock or custom frames, including old-style oil tanks. 19078 Replaces OEMs 37052-65 (late), 37051-36 (early) and 37053-68 with mousetrap eliminator setup 18430 Chrome Clutch Release Levers Chrome replacement clutch release levers for 4-speed Big Twins. Both levers feature a precision-machined early-style broach for the release finger stud, permitting a wider range of applications than the stock lever. 18430 Fits 4-speed FL and FX models from late 79-86 (repl. OEM 37054-79) Chrome Transmission Shift Lever This custom part replaces the dull factory transmission shift lever with brilliant chrome. Made of steel. 688723 Fits 5- and 6-speed Big Twins from 97-17(except M8 models) (repl. OEM 33849-97) 624105 Baker Drivetrain Transmission Service Parts High Torque Bearing Kit The OEM 34091-85 inner bearing race has been used on Big Twin since 85. The inner primary bearing rides on this race . By design, this race press-fits onto the transmission mainshaft. This system works fine for stock engines. 100 HP+ engines will make this bearing walk on the mainshaft. If it walks inboard, it will damage the main drive gear seal and cause a transmission oil leak. If it walks outboard, it will cause a primary oil leak. The Baker high torque bearing kit eliminates this condition. Kit includes a precision honed bearing and seal. 624105 Fits Big Twin models from 84-06 Anti-Overshift Ratchet Pawl 624106 The stock ratchet pawl used from 80-00 utilized a scissor spring that was well known for breaking. Each time an upshift or downshift is made the pawl spring is cycled. After many cycles, the spring breaks. The unfortunate side effect of this failure is the broken spring led going through the transmission gears and destroying the transmission. Any seasoned tech has seen this one. The Baker new ratchet pawl utilizes a rectangular crosssection spring like the 21st century Big Twins. Other improvement is the lever “beak” for overshift protection. 624106 Fits Big Twin 5-speed models 80-99 Chrome Mousetrap Clutch Release Lever Fits 41-79 Big Twins (68-E79 hand shift only). Also used with CC #19507 Jockey Shift Conversion Kit and Suicide Setup. 19079 Replaces OEMs 37051-36, 37052- 65 Shift Lever Bushings If you’re riding a late 79-86 4-speed FL or FX model, then you’ve probably got a sloppy gear shifter linkage that can be traced to this part or the aluminum shifter arm. Ream your aluminum shifter lever to accept this oversize bushing and restore that ‘good as new’ feel. 20140 Standard size (repl. OEM 33187- 79)pack of 5 20141 .020" oversize (pack of 5) 11.38

20126 APPAREL 20125 20127 SEATS & TOURING Ratchet Top Assembly Replacement Parts Listed in OEM part number order. 09305 1/4"-24 x 13/16" chrome sockethead screw (repl. OEM 1766W) pack of 10 09306 10-24 x 1/2" chrome sockethead screw (repl. OEM 1767W) pack of 10 09308 Shifter gear spring (repl. OEM 33390-26) sold each 09309 Shifter gear (repl. OEM 33960- 36A) sold each 09312 Lock screw (repl. OEM 34050-36) pack of 10 09313 Cam follower (repl. OEM 34062- 52) sold each 09314 Chrome cam follower retainer (repl. OEM 34064-52) sold each 09316 Cam follower spring (repl. OEM 34068-52) pack of 10 09319 Shifter pawl (repl. OEM 34478- 75) sold each 09322 Pawl carrier spring (repl. OEM 34500-52A) pack of 10 09326 Chrome vent screw (repl. OEM 34720-56) pack of 10 Mainshaft Drive Gear Spacers For 4-speed Big Twin models from 38-86. 25375 Fit 80-81 (repl. OEM 35070-80). Use with OEM 37741-67 oil seal (CC #25323) and OEM 8905 needle bearing (CC #25450) 25376 Fit 38-E77 (repl. OEM 35171-37). Use with OEM 35175-38 locking key (CC #20096) 25377 Spacer, late 77-79 models (repl. OEM 35070-77) 25379 Spacer, main drive gear, belt drive, 82-86 (repl. OEMs 35070- 82A, 35070-84) Kustom-Tech Shift Lever Machined from billet aluminum and billet brass, inspired by hot rod shift levers, this shifter lever comes with an all aluminium adjustable shifter rod, the bracket fits many motor mounts and can be used for other custom applications. 696056 Shift lever 19351 Shifter Finger Parts for 4-Speed Models High-quality American-made shift fork parts meet or exceed OEM specifications. 19351 Shift finger rollers for Big Twins from 41-E79 (repl. OEM 34168- 39) pack of 10 20125 Shifter finger for all 4-speed Big Twins from 36-E76 (repl. OEM 34165-36) sold each 20126 Shift fork bushing for all 4-speed Big Twins from 36-E76 (repl. OEM 34175-36) sold each 20127 Shift fork nut for all 4-speed Big Twins from 36-86 (repl. OEM 34179-33) sold each 28044 Shift finger rollers for 4-speed Big Twins from late 79-86 and Sportster and K models from 54-90 and (repl. OEM 34168-52) pack of 10 Shims and Washers 56208 .007"-thick shims. Fit all 4-speed Big Twins from 36-86 (repl. OEM 6750) pack of 10 56209 .015"-thick shims. Fit all 4-speed Big Twins from 36-86 (repl. OEM 6752) pack of 10 56210 Fork washers. Fit all 4-speed Big Twins from 36-E76 (repl. OEM 6754) pack of 10 FOOT CONTROLS HAND CONTROLS LIGHTING ELECTRICAL EXHAUST INTAKE ENGINE GASKETS TRANNY & CLUTCH DRIVELINE WHEELS, TIRES & BRAKES FRAMES 28155 Chrome Dust Shield and Shifter Lever Sets Shifter lever and dust cover sets for 4-speed models. Include mounting hardware. 28156 28155 Fits FX models from 74-E79 (repl. OEMs 34447-74, 34555-74) 28156 Fits FL models from 52-E79 (repl. OEMs 34447-52, 34555-52) 20017 20067 Shifter Fork Shafts American-made shafts for 4-speed Big Twins from 36-86. Sold each. 20017 Fits 36-E76 models (repl. OEM 34140-36) 20067 Fits late 76-86 models (repl. OEM 34186-76) for more details check www.custom-chrome-europe.com 19348 19347 Shifter Forks Fit the 4-speed transmissions in all Big Twin models from 36-86. 19347 Mainshaft fork (3rd-4th) repl. OEM 34158-36T 19348 Countershaft fork (1st-2nd) repl. OEM 34159-36T FORKS & SHOCKS SHEETMETAL INSTRUMENTS & GAUGES LUBRICANTS & CHEMICALS TOOLS & EQUIPMENT 11.39

CCE Online Publication

Shifter Forks Power Clutch Clutchlite Ez Pull Hydro Clutch Hydraulic Clutch Tranny Covers Baker Transmission Shift Paw Shifter Shaft Close Ratio Evo Transmission Evo Getriebe Evo Kupplung Twin Cam Kupplung Twin Cam Clutch Evo Clutch Countershaft Mainshaft Transmission