Views
6 months ago

11 TRANNY & CLUTCH

  • Text
  • Forks
  • Clutch
  • Clutchlite
  • Pull
  • Clutch
  • Clutch
  • Covers
  • Transmission
  • Paw
  • Shaft
  • Ratio
  • Transmission
  • Getriebe
  • Kupplung
  • Kupplung
  • Clutch
  • Clutch
  • Countershaft
  • Mainshaft
  • Transmission
Complete transmissions, 4-, 5-, 6-Speed transmissions, transmission parts, gears and bearings, clutch parts, friction plates, steel plates, gear sets

18430 18433 Jockey Shift

18430 18433 Jockey Shift Conversion Kit This kit converts foot shift and hand clutch to Jockey Shift with foot-operated clutch. Fits all 4-speed Big Twins with wrap-around oil tanks ONLY through early 79 as well as custom applications. The shift lever is also sold separately. 19507 Complete jockey shift conversion kit 19506 Jockey shift lever only (3/8”- 24 thread) 5-Speed Clutch Release Lever Set A complete chrome-plated clutch release lever set for all 5-speed models from 80-86. This single kit replaces the four separate Original Equipment clutch release arms that the factory has used since 80. Replaces the stock release arm and cable bracket with a stronger, forged release arm and die-cast transmission top cable bracket. Chrome mounting hardware and acorn nut included. 18438 Replaces OEM 37063-90T Note: The installation of this part on 80-82 FXR and FLT models will also require the installation of an OEM 38599-83A clutch cable which is routed along the left side of the engine instead of the right. See the CC cable charts in Section 4 for the different styles of cables available. Chrome Clutch Release Levers Chrome replacement clutch release levers for 4-speed Big Twins. Both levers feature a precision-machined early-style broach for the release finger stud, permitting a wider range of applications than the stock lever. 18430 Fits 4-speed FL and FX models from late 79-86 (repl. OEM 37054-79) 18433 Fits 4-speed FL and FX models from 68-E79 (repl. OEM 37053-68) 93894 Fits RevTech 5 into 4 speed transmissions 070038 11 070039 Clutch Release Finger and Shaft Replacement clutch releasing finger and shaft for 4-speed Big Twins from 41-86. 070038 Shaft (repl. OEM 37074-38A) 070039 Releasing finger (repl. OEM 37070-39) 25928 Heavy-duty clutch release finger (repl. OEM 37010-39B) 070021 “E” Clip style retaining ring for 4-speed Big Twins 70-86 (pack of 10) Chrome Mousetrap Clutch Release Lever Fits 41-79 Big Twins (68-E79 hand shift only). Also used with CC #19507 Jockey Shift Conversion Kit and Suicide Setup. 19079 Replaces OEMs 37051-36, 37052-65 Chrome Transmission Shift Lever This custom part replaces the dull factory transmission shift lever with brilliant chrome. Made of steel. 688723 Fits 5- and 6-speed Big Twins from 97-17(except M8 models) (repl. OEM 33849-97) 15908 15909 15906 Clutch Lever Rods and Ends Rods 15906 For use with Mousetrap and Suicide setup (repl. OEM 36918-52) 22 3/8"- long 15908 Fits old-style rocker clutch from 36-51 (repl. OEM 36917-36) 18 3/8"-long Clutch Lever Rod End Used on CC #’s 15906 and 15908 clutch rods. 15909 Repl. OEMs 36916-36, 36916-52 Chrome Clutch Release Lever For all Big Twins up to early 79 with stock or custom frames, including old-style oil tanks. 19078 Replaces OEMs 37052-65 (late), 37051- 36 (early) and 37053-68 with mousetrap eliminator setup Shift Lever Bushings If you’re riding a late 79-86 4-speed FL or FX model, then you’ve probably got a sloppy gear shifter linkage that can be traced to this part or the aluminum shifter arm. Ream your aluminum shifter lever to accept this oversize bushing and restore that ‘good as new’ feel. 20140 Standard size (repl. OEM 33187-79) pack of 5 20141 .020" oversize (pack of 5) 11.36

TRANNY & CLUTCH APPAREL 624105 624107 Baker Drivetrain Transmission Service Parts High Torque Bearing Kit The OEM 34091-85 inner bearing race has been used on Big Twin since 85. The inner primary bearing rides on this race . By design, this race press-fits onto the transmission mainshaft. This system works fine for stock engines. 100 HP+ engines will make this bearing walk on the mainshaft. If it walks inboard, it will damage the main drive gear seal and cause a transmission oil leak. If it walks outboard, it will cause a primary oil leak. The Baker high torque bearing kit eliminates this condition. Kit includes a precision honed bearing and seal. 624105 Fits Big Twin models from 84-06 Anti-Overshift Ratchet Pawl The stock ratchet pawl used from 80-00 utilized a scissor spring that was well known for breaking. Each time an upshift or downshift is made the pawl spring is cycled. After many cycles, the spring breaks. The unfortunate side effect of this failure is the broken spring led going through the transmission gears and destroying the transmission. Any seasoned tech has seen this one. The Baker new ratchet pawl utilizes a rectangular cross-section spring like the 21st century Big Twins. Other improvement is the lever “beak” for overshift protection. 624106 Fits Big Twin 5-speed models 80-99 Baker “Recal Box” Starting in 94, the factory started using electronic speedos on some of the models. Today all models use this. If you are changing the transmission pulley, rear wheel pulley, rear tire size or installing one of ours or Baker’s transmission and/or gear sets you will need a recalibration unit. You can dial it in dead-nuts after you install it in-line with your existing wiring harness. 624107 Fits Big Twin models 94-06 SEATS & TOURING FOOT CONTROLS HAND CONTROLS LIGHTING ELECTRICAL EXHAUST 624106 INTAKE Ratchet Top Assembly Our ratchet top unit comes chrome-plated or polished and is completely assembled. It includes a top cover gasket, sockethead mounting hardware, a vent screw and neutral switch. It features an investment-cast FL-style shift drum for forward control shift patterns. This unit will fit all 4-speed Big Twin transmissions from 52-E79. 09300 Complete chrome-plated assembly (repl. OEM 34799-65) 09299 Complete polished assembly 09325 Chrome ratchet top cover ONLY (repl. OEM 34803-59) ENGINE GASKETS Replacement Parts Listed in OEM part number order. 09303 10-24 x 1 5/32" screw and nut (repl. OEMs 1764W, 7620) pack of 10 09305 1/4"-24 x 13/16" chrome sockethead screw (repl. OEM 1766W) pack of 10 09306 10-24 x 1/2" chrome sockethead screw (repl. OEM 1767W) pack of 10 09307 10-24 x 1 3/8" screw (repl. OEM 1772W) pack of 10 09308 Shifter gear spring (repl. OEM 33390-26) sold each 09309 Shifter gear (repl. OEM 33960-36A) sold each 09310 Shifter cam, cast style (repl. OEM 34019-73) sold each 09311 Shift cam shaft with seal (repl. OEMs 34031-41, 34036-36) sold each 09312 Lock screw (repl. OEM 34050-36) pack of 10 09313 Cam follower (repl. OEM 34062-52) sold each 09314 Chrome cam follower retainer (repl. OEM 34064-52) sold each 09316 Cam follower spring (repl. OEM 34068-52) pack of 10 09317 Shift shaft bushing (repl. OEM 34435-52) sold each 09318 Shifter shaft (repl. OEM 34453-52) sold each 09319 Shifter pawl (repl. OEM 34478-75) sold each 09320 Shifter pawl spring (repl. OEM 34482-53) pack of 10 09321 Shifter pawl carrier with bushing (repl. OEMs 34488-52B, 34498-52) sold each 09322 Pawl carrier spring (repl. OEM 34500-52A) pack of 10 09323 Pawl retainer (repl. OEMs 34525-54, 1608) sold each 09324 Shifter adapter plate (repl. OEM 34560-52) sold each 09326 Chrome vent screw (repl. OEM 34720-56) pack of 10 TRANNY & CLUTCH DRIVELINE WHEELS, TIRES & BRAKES FRAMES FORKS & SHOCKS SHEETMETAL INSTRUMENTS & GAUGES Chrome Dust Shield and Shifter Lever Sets Shifter lever and dust cover sets for 4-speed models. Include mounting hardware. 28155 Fits FX models from 74-E79 (repl. OEMs 34447-74, 34555-74) 28156 Fits FL models from 52-E79 (repl. OEMs 34447-52, 34555-52) LUBRICANTS & CHEMICALS 28155 28156 TOOLS & EQUIPMENT for more details check www.custom-chrome-europe.com 11.37

CCE Online Publication

1 APPAREL
2 SEATS & TOURING
3 FOOT CONTROLS
4 HAND CONTROLS
5 LIGHTING
6 ELECTRICAL
7 EXHAUST
9 ENGINE
10 GASKETS
11 TRANNY & CLUTCH
12 DRIVELINE
13 WHEELS, TIRES & BRAKES
14 FRAMES
15 FORKS & SHOCKS
16 SHEETMETAL
17 INSTRUMENTS & GAUGES
19 TOOLS & EQUIPMENT
01-2019 Rhine Time
02-2019 10 Years Anniversary BOAR Bikes
01-2018 BOAR Bike Fusion
03-2018 BOAR Bike CCEagle
05-2018 BOAR Bike CrossBob
04-2018 BOAR Bike H9 Sportster
2014 BOAR Video Sexy Thing
2015 BOAR Video THIS_IS
2017 BOAR Video AT NIGHT
2016 BOAR Ride Video Ride Unrivalled
02-2018 MBE Verona Bikeshow
03-2018 European Bike Week Faak
2016 CC-Riders
CCE SPECIAL FEATURE Cafe+Dirt Track
Shifter Forks Power Clutch Clutchlite Ez Pull Hydro Clutch Hydraulic Clutch Tranny Covers Baker Transmission Shift Paw Shifter Shaft Close Ratio Evo Transmission Evo Getriebe Evo Kupplung Twin Cam Kupplung Twin Cam Clutch Evo Clutch Countershaft Mainshaft Transmission