Views
4 years ago

11 TRANNY & CLUTCH

  • Text
  • Forks
  • Clutch
  • Clutchlite
  • Pull
  • Clutch
  • Clutch
  • Covers
  • Transmission
  • Paw
  • Shaft
  • Ratio
  • Transmission
  • Getriebe
  • Kupplung
  • Kupplung
  • Clutch
  • Clutch
  • Countershaft
  • Mainshaft
  • Transmission
Complete transmissions, 4-, 5-, 6-Speed transmissions, transmission parts, gears and bearings, clutch parts, friction plates, steel plates, gear sets

Big Bearing Billet

Big Bearing Billet Trapdoor by JIMS This billet 7075-T651 trap door is five times stronger than stock and comes complete with dual row bearings installed and locked. This material coupled with the oversized support bearings, means these trapdoors can withstand the abuse of three to four times the power and torque of stock motors. Can be used with all early and late 5-speed transmissions. 22328 Chrome fits Big Twin models from 80-06 (except FLT, FLHT, FLHS and Road King models) 22326 Polished Fits Big Twin models from 80-06 (except FLT, FLHT, FLHS and Road King models) 11 STOCK RevTech Gear Sets for 5-Speed Big Twin Transmissions Features include hard-chromed mainshafts, back-cut gears for smoother shifting and your choice of stock 3.24:1 or close-ratio 2.94:1 first gears. All of the gears are made from 8620H highstrength chromemoly steel, with gears finish ground for maximum strength and precise engagement. Gears are also computer measured and matched for smooth, vibration-free operation. Sets include shafts, gears, bearings, spacers and snaprings. Most components are completely compatible with Original Equipment gears as well as other aftermarket offerings. CLOSE-RATIO 30506 30502 Fit all models from 90-94 (also fit custom applications with cable-driven speedometers) 30505 30501 Fit all models from 85-89 with wet clutch and belt final drive Gear Set for Models with Electronic Speedometers Intended for use with CC #’s 30502 and 30506 gear sets when installing them in models from 95-05 equipped with electronic speedometers. Includes fourth gear mainshaft and countershaft gears. Replacement Parts for RevTech Transmissions and Gear Sets All of the parts listed below are only to be used to replace those in RevTech transmissions and gear sets. 30516 RevTech 2.94:1 close-ratio first gear, countershaft. 80-05 with RevTech gear set Replacement Parts for RevTech and Original Equipment Transmissions and Gear Sets Listed in OEM part number order and are sold each unless otherwise noted. 56258 Thrust washers. 80-05 (repl. OEM 6003) Pack of 5. 30529 Split case bearing, mainshaft and countershaft. 80-05 (repl. OEM 8876A) Pack of 4. 30530 Bearing, mainshaft fifth gear for models from 80-90 (repl. OEM 8904) 54046 Seal, main drive gear for models from 80-90 (repl. OEM 12013A) Pack of 10. Price each. 54040 Oil seal, Fifth gear mainshaft. 91-98 (repl. OEM 12035) Pack of 10. Price each. 30528 Bearing, inner race, mainshaft. 85-05 (repl. OEM 34091-85) Replacement Parts for RevTech and Original Equipment Transmissions and Gear Sets (continued) 30513 RevTech fourth gear, mainshaft. (repl. OEM 35028-79) 30531 Bearing, mainshaft fifth gear for models from 91-05 (repl. OEM 35051-89) 685364 Case bearing for left side mainshaft. 84-98 (repl. OEM 8996) 56248 Spacer, mainshaft. 80-05 (repl. OEM 35064-79) 30517 RevTech fourth gear, countershaft. 80-05 (repl. OEM 35625-79A) 56247 Spacer, countershaft. 80-05 (repl. OEM 35629-86) pack of 10. 56308 Key, clutch hub for models from 85-89 (repl. OEM 37523-85) pack of 10. 11.32

APPAREL SEATS & TOURING FOOT CONTROLS HAND CONTROLS RevTech 4-Speed Close-Ratio Gear Sets Matched close-ratio transmission gear sets for Big Twin models from 36-E84. Each set is complete with the proper gears, shifter clutches, mainshaft, countershaft, countershaft bearings and all of the necessary snap rings and thrust washers. The shafts are polished at the spline and maindrive bushing area and include an O-ring groove and seals wherever necessary. Gears are honed and finish ground for precise engagement and maximum strength. The shifter clutches and shifter dog faces are widened .020" to prevent chipping. Many of the components of these high-quality kits are compatible with Original Equipment transmission gears as well as other aftermarket offerings. Because of the high-quality of the materials and workmanship in these components and their affordable low price, they are one of the best values available in the performance transmission market today. 2.44:1 Close-Ratio Sets 30730 2.44:1 Close-Ratio Sets Late Late 77-E84 (caged rollers) Note: Late 80-early 84 models require Original Equipment countershaft (OEM 35614-80), which is available as CC #24211. 2.60:1 Close-Ratio Sets 30725 2.60:1 Close-Ratio Sets 70-E77 (loose rollers) 30735 2.60:1 Close-Ratio Sets Late 77-E84 (caged rollers) Note: Late 80-early 84 models require Original Equipment countershaft (OEM 35614-80), which is available as CC #24211. RevTech 4-Speed Transmission Parts Compatible with all Original Equipment and aftermarket gears. 30757 Mainshaft, 65-69 (repl. OEM 35039-65) 30770 Shifter clutch, countershaft, 36-86 (repl. OEM 35665- 36A) 6-Speed Builders Kit The Ultima Six Speed Builders kit was designed to provide a simple,low cost, 6 speed overdrive solution for 1990/L Big twin owners.These kits work in most 1990-1999 models with little or no modification. A speedometer recalibration unit is required on some 1996-2000 and all 2001 later models. These kits will work in 5 spd type 2000/Later models with additional minor modifications. The trap door is thicker than stock so any brackets used that are trap door mounted may need modification. Complete instructions included. • Roller Detent for smoother shifting • Precision Ground 8620 Gears and shafts • Chrome Plated Billet Trap Door • Gear Ratios are: • 1. 2.94: 1 • 2. 2.21: 1 • 3. 1.57: 1 • 4. 1.23: 1 • 5. 1: 1 • 6. 0.86: 1 Part#: 919401 , Fitment: 91-99 Softail , Unit: Each , Qty.: 1 LIGHTING ELECTRICAL EXHAUST INTAKE ENGINE GASKETS TRANNY & CLUTCH DRIVELINE WHEELS, TIRES & BRAKES FRAMES FORKS & SHOCKS Custom Chrome Close-Ratio Gear Sets for 4-Speed Big Twins Kits are assembled from our stock replace ment-quality 4-speed Big Twin gears, shafts and components for 36-E84 transmissions. They have the popular and functional 2.44:1 ratio first gears and 1.35:1 ratio third gears that provide a taller first gear with better gear spacing to improve overall driveability. Each kit includes gears, shift clutches, mainshaft, countershaft, bushings, bearings, snaprings and thrust washers necessary for installation (except the mainshaft bearing which does not usually require replacement). 30695 4 speed gears sets 36-64 Note: 80-early 84 models require an Original Equipment countershaft (OEM 35614-80) which is sold as CC #24211. for more details check www.custom-chrome-europe.com SHEETMETAL INSTRUMENTS & GAUGES LUBRICANTS & CHEMICALS TOOLS & EQUIPMENT 11.33

CCE Online Publication

Shifter Forks Power Clutch Clutchlite Ez Pull Hydro Clutch Hydraulic Clutch Tranny Covers Baker Transmission Shift Paw Shifter Shaft Close Ratio Evo Transmission Evo Getriebe Evo Kupplung Twin Cam Kupplung Twin Cam Clutch Evo Clutch Countershaft Mainshaft Transmission